Alpine CDA-9820XM Specifications Controls on Remote Control Optional, Remote control sensor

Specifications		Controls on Remote Control (Optional)
FM TUNER SECTION		This unit can be controlled with an optional Alpine remote control.
Tuning Range	87.7 – 107.9 MHz	For details, consult your Alpine dealer.
Mono Usable Sensitivity	9.3 dBf (0.8 µV/75 ohms)
50 dB Quieting Sensitivity	13.5 dBf (1.3 µV/75 ohms)	Point the optional remote control transmitter at the
Alternate Channel Selectivity	80 dB	remote control sensor.
Signal-to-Noise Ratio	65 dB
Stereo Separation	35 dB	Remote control sensor
Capture Ratio	2.0 dB
AM TUNER SECTION
Tuning Range	530 – 1,710 kHz
Sensitivity (IEC Standard)	22.5 µV/27 dB
XM TUNER SECTION
Signal-to-Noise Ratio	85 dB
Stereo Separation	75 dB
Usable Sensitivity	-98 dBm (Satellite)
	-95 dBm (Terrestrial)
CD PLAYER SECTION
Frequency Response	5 – 20,000 Hz (±1 dB)
Wow & Flutter (% WRMS)	Below measurable limits
Total Harmonic Distortion	0.008% (at 1 kHz)
Dynamic Range	95 dB (at 1 kHz)
Signal-to-Noise Ratio	105 dB
Channel Separation	85 dB (at 1 kHz)
PICKUP
Wave length	795 nm
Laser power	CLASS I
GENERAL
Power Requirement	14.4 V DC
	(11–16 V allowable)
Power Output	18W RMS ⋅ 4*

*Primary amplifier ratings per CEA-2006 Standard

•Power output: measured at 4 Ohms and ≤ 1% THD+N

•S/N: 80 dBA (reference: 1 W into 4 Ohms)

Maximum Pre-Output Voltage	2 V/10 k ohms
Bass	±14 dB at 60 Hz
Treble	±14 dB at 10 kHz
Weight	1.5 kg (3 lbs. 5 oz)
CHASSIS SIZE
Width	178 mm (7")
Height	50 mm (2")
Depth	160 mm (6-1/4")
NOSEPIECE SIZE
Width	170 mm (6-11/16")
Height	46 mm (1-13/16")
Depth	20 mm (25/32")

•Due to continuous product improvement, specifications and design are subject to change without notice.

23-EN