Alpine 68-14470Z98-A owner manual Operation, Setup Before Using

BLUETOOTH

Operation

Rotary encoder

/VOICE DIAL SOUND/SETUP

/MUTE/ 1 2

/ /ENT

Setup Before Using

About BLUETOOTH

BLUETOOTH is a wireless technology allowing communication between a mobile device or personal computer over short distances. This enables a hands-free call or data transmission between BLUETOOTH compatible devices.

•Depending on the BLUETOOTH version, a BLUETOOTH compatible device may not be able to communicate with this unit.

•Proper function of this unit with all BLUETOOTH compatible devices is not guaranteed. For handling of the BT compatible device, consult your ALPINE dealer or ALPINE website.

•Depending on the surroundings, BLUETOOTH wireless connection may be unstable.

•When you place a call, or perform setup operations, be sure to stop your car in a safe place.

•Depending on the connected BLUETOOTH compatible device(s), the function may differ. Also refer to the Owner’s Manual of the connected device(s).

Before Using Hands-Free Function

Before using the hands-free phone/audio function, the following settings need to be made.

1 Be sure to set “INT MUTE” to OFF. Refer to the SETUP function on page 15.

•To enable sound pass-through of the BLUETOOTH compatible device, make sure that INT MUTE is turned OFF (Initial setting on the unit is OFF).

2 Set “BT IN” to BT ADAPTER (page 16).

•Before using a hands-free phone, it must be paired with this unit. Refer to “BLUETOOTH SETUP” (pages 18-19).

How to connect to a BLUETOOTH compatible device (Pairing)

For details on the control from a BLUETOOTH compatible device, refer to the Owner’s Manual of the BLUETOOTH compatible device.

1 Set a BLUETOOTH connection from a BLUETOOTH compatible device.

2 The PIN code (“0000”) is displayed on the connected unit.

•The PIN code is fixed as “0000.”

3 Input the PIN code (“0000”) in a BLUETOOTH compatible device.

4 If this unit is successfully connected to a BLUETOOTH compatible device, “CONNECTED” is displayed, and then the unit returns to normal mode.

•The registration number 5 is deleted when you set ignition from ACC to OFF. If all the 5 positions have been registered, you cannot register the 6th device. To register another device, you need to delete one of the device from position 1 to 5 first.

•If a BLUETOOTH compatible device is successfully connected, the next time when the ignition key of the car is turned to on, the unit will automatically connect to the previously connected device. However, the connection may fail. If the auto connection fails, try the connection manually.

•Set “Setting the Search Mode” (page 19) to VISI M ON to enable this unit to recognize a mobile phone. For mobile phone passkey (passcode) input operation, refer to the mobile’s Owner’s Manual.

BLUETOOTH SETUP

BLUETOOTH Setup Operation

The following steps 1 to 4 are common to the various BLUETOOTH functions. For details, refer to each individual function.

•While calling, BLUETOOTH Setup operation cannot be performed.

•Set “BT IN” to BT ADAPTER, and then perform BLUETOOTH SETUP operation.

1 Press and hold SOUND/SETUP for at least 2 seconds to activate the SETUP mode.

2 Turn the Rotary encoder to select the desired items and then press/ /ENT.

BT IN PAIRED DEV* VISIBLE M* AUTO ANS* CLEAR DEV* SEV NAME* MIC INPUT* SPEAKER SL* FW VERSION* FW UPDATE*

*When “BT IN” is set to BT ADAPTER, the above items are displayed.

3 Turn the Rotary encoder to change the settings.

4 Press and hold SOUND/SETUP for at least

2 seconds.

The SETUP mode is canceled.

18-EN