Alpine 68-14470Z98-A Searching for a desired Song, Press SOURCE/ to switch to the iPod mode

Page 25
Turn the Rotary encoder to select the desired Album, and then press / /ENT.
Turn the Rotary encoder to select the desired Song, and then press / /ENT.

Playback

1 Press SOURCE/ to switch to the iPod mode.

TUNER DISC USB AUDIO iPod*1/AUX+*2

AUX*3 TUNER

*1 Displayed only when the iPhone/iPod is connected and AUX+ SETUP is set to OFF, refer to “Setting the AUX+ SETUP Mode” (page 17).

*2 Displayed only when the AUX+ SETUP is set to ON, refer to “Setting the AUX+ SETUP Mode” (page 17).

*3 Refer to “Using the Front AUX Input Terminal” (page 15).

2 Press or to select the desired song.

Return to the beginning of the current song:

Press .

Fast backward through current song:

Press and hold .

Advance to the beginning of the next song:

Press .

Fast forward through current song:

Press and hold .

3 To pause playback, press / /ENT.

Pressing / /ENT again will resume playback.

A song playing on the iPhone/iPod while it is connected to this unit will continue to play from where it was paused after disconnection.

If you listen to an episode from a selected podcast or audiobook, the episode can be changed by pressing 1 or 2.

An episode may have several chapters, the chapter can be changed

by pressing or .

Searching for a desired Song

An iPhone/iPod can contain hundreds of songs. By using file tag information and keeping these songs organized in playlists, this unit’s search functions will ease song searches.

Each music category has its own individual hierarchy. Use the Playlist/ Artist/Album/Song/Podcast/Genre/Composer/Audiobook search mode to narrow searches based on the table below.

Hierarchy 1

Hierarchy 2

Hierarchy 3

Hierarchy 4

 

 

 

 

Playlist

Song

 

 

 

 

Artist*

Album*

Song

 

 

 

 

Album*

Song

 

 

 

 

Song

 

 

 

 

Podcast

Episode

 

 

 

 

Genre*

Artist*

Album*

Song

 

 

 

 

Composer*

Album*

Song

 

 

 

 

Audiobook

 

 

 

 

For example: Searching by Artist name

The following example explains how an ARTIST search is performed. Another search mode can be used for the same operation, although the hierarchy differs.

1 Press /ESC to activate the search selection mode. The ” indicator lights up.

2 Turn the Rotary encoder to select the ARTIST search mode, and then press / /ENT.

PLAYLIST ARTIST ALBUM SONG PODCAST GENRE COMPOSER AUDIOBOOK PLAYLIST

3 Turn the Rotary encoder to select the desired Artist, and then press / /ENT.

4

5

After pressing and holding / /ENT for at least 2 seconds while in each hierarchy (except SONG and AUDIOBOOK hierarchy), all songs of the selected hierarchy are played back.

After selecting [ALL] in the search mode with“*”, press and hold

/ /ENT for at least 2 seconds to play back all songs in the

iPhone/iPod or selected search mode.

While in the search mode, if you press and hold /ESC for

2 seconds, or no operation is performed for 10 seconds, the search mode is canceled.

In the search mode, pressing /MUTE will return to the previous mode.

When search is made during M.I.X. play, the M.I.X. play mode will be canceled.

“NO SONG” will be displayed if there are no songs in the selected playlist in the PLAYLIST search mode.

“NO PODCAST” will be displayed if there is no podcast data in the iPhone/iPod in the PODCAST search mode.

“NOAUDIOBOK” will be displayed if there is no audiobook data in the iPhone/iPod in the AUDIOBOOK search mode.

If “iPod name” stored in the iPhone/iPod is selected in the desired

Playlist search mode, and / /ENT is pressed, you can search for all songs in the iPhone/iPod. Also, if you press and hold / /ENT for at least 2 seconds, all songs in the iPhone/iPod are played back.

Depending on the iPhone/iPod, podcast search is not supported.

If any one of the preset buttons (1 through 6) is pressed in the search mode, a search can be made quickly by skipping to the specified location. For details, refer to “Direct Search Function” on page 24.

Quick Search

You can search a song from all songs in the iPhone/iPod without selecting an album, artist, etc.

1 Press and hold /ESC for at least 2 seconds to activate the Quick Search mode.

The “” indicator lights up.

2 Turn the Rotary encoder to select a desired song.

The selected song is played back immediately.

Press and hold /ESC for at least 2 seconds in the search mode to cancel. Or, the search mode is canceled if no operation is performed for 10 seconds.

If many songs are in the iPhone/iPod, it takes time to search for songs.

If any one of the preset buttons (1 through 6) is pressed in the search mode, a search can be made quickly by skipping to the specified location. For details, refer to “Direct Search Function” on page 24.

This function is inactive during repeat () playback.

23-EN

Image 25
Contents CDE-103BT Page Contents Operating Instructions Installation and Connections Operating Instructions Never Attempt the Following On handling Compact Discs CD/CD-R/CD-RW Getting Started Presetting Stations Manually Setting TimeListening to Radio Tuning to Preset Stations Presetting Stations AutomaticallyPlayback Insert a disc with the label side facing upX. Random Play Repeat PlayQuick Search Searching for CD TextAbout MP3/WMA/AAC Terminology Setting the Bass Control Sound SettingDefeat Adjusting the High Pass Filter Setting the Treble ControlSetting the Treble Center Frequency Setting the Treble LevelDisplaying the Text Other FunctionsDisplaying Time Turn the Rotary encoder to change the setting Using the Front AUX Input TerminalSelect Subwoofer Select Subw on or Subw OFFSound Customizing Bluetooth SettingVisual Customizing External DeviceSetting the AUX+ Setup Mode Connecting to an External Amplifier Power ICSetting the AUX Name mode SpeakersOperation Setup Before UsingSetting the Search Mode Setting the Bluetooth DeviceSetting the Received Calls automatically Auto Answer Deleting a Bluetooth Device from the listHands-Free Phone Control USB memory Optional USB Memory Connection Optional IPhone/iPod OptionalAbout MP3/WMA/AAC File of USB Memory IPhone/iPod models usable with this unitSearching for a desired Song Press SOURCE/ to switch to the iPod modePress or to select the desired song Turn the Rotary encoder to select a desired songRandom Play Shuffle M.I.X Direct Search FunctionRepeat One To cancel repeat play, select off with the above procedureSingle song is repeatedly played back Song is played back repeatedly Off Repeat OneCase of Difficulty InformationBasic RadioIPod AudioIndication for CD Player Indication for USB memoryBluetooth mode Indication for iPod ModeIndication for all Modes FM Tuner Section SpecificationsInstallation and Connections Mounting the Microphone InstallationRemoval Pull the unit out, keeping it unlocked as you do soConnections To iPhone/iPod Antenna To power antennaSwitched Power Lead Ignition Red Antenna Receptacle Power Antenna Lead BlueFuse Holder 10A Front Output RCA Connectors Rear/Subwoofer Output RCA ConnectorsThis Warranty does not cover the following Limited Warranty