cs DISC EJECT ( )
Disc play is stopped and the disc is ejected when the front panel is folded down and this button on the rear of the panel is pressed. Radio or CD changer operation will automatically resume depending on which mode was in operation prior to disc play. If the disc is not removed from the unit within 10 seconds of being ejected, it will automatically be re- loaded into the unit to prevent it from being
accidentally damaged (IN will appear on the display panel to indicate that a disc is loaded in the player). Play of the disc can be resumed by using the Mode Selector bt to choose CD player function.
ct TIME/FREQUENCY SELECTOR (T/F)
During radio operation, press this button to call the time display on the incorporated quartz clock. The display will return to the radio frequency indication after 5 seconds. During CD player operation, the first press of the button will call the track elapsed time on the display panel. A second press will call the time display. During CD changer operation the first press of the button will call the time display. A second press will call the disc slot number and track number in play. In either case, the display will return to the disc indication after 5 seconds.
cu EQUALIZER BUTTON (EQ)
The EQ button applies preset sound effects to the unit’s audio output signal. The EQ button, when pressed, will activate one of three operating modes (ROCK, CLAS, or POP). When the EQ function is active the bass and treble levels cannot be changed. When the EQ function is not active, the unit returns to the user set bass and treble levels.
dl THEFT-DETERRENT LED
Located on the chassis behind the front panel, a
dm RESET BUTTON
circuitry and should only be activated under the following circumstances as it will erase the time and
1.Upon initial installation after all wiring is completed.
2.If there is a malfunction of any of the switches, on the unit, pressing the RESET button may clear the system and return to normal operation.
dn REMOTE SENSOR
The sensor to detect the infrared signal from the wireless remote control is located behind this lens. For optimum operation of the remote control, always aim the control at this sensor.
do FRONT PANEL RELEASE BUTTON (OPEN)
This button is used to release the mechanism that holds the front panel to the chassis. To detach the front panel, press the button so that the paneldrops to the lowered position. Grasp the panel at the middle and pull it off of the chassis. After removing the panel, push the metal plate back up to the vertical position. To
OPERATING INSTRUCTIONS
10