CD CHANGER CONTROLS
13
CD CHANGER CONTROLS
Built into this radio are controls to operate an optional CD changer. Please check with your Rampage/Audiovox car stereo specialist or call
Adjustment of the audio functions (volume, tone, balance, and fader) for the CD changer operate in the same manner as they do for radio play. The following controls will operate the CD changer when it is installed and connected to this radio. Refer to the owner’s manual included with the CD changer for instructions on the installation and correct loading and use of the CD magazine.
dpCD CHANGER MODE SELECTOR (MOD)
During radio or CD play, press this button to select operation of the CD changer as shown by CDC on the display panel. Disc play will begin and the disc and track number will be shown on the display panel. If a new magazine has been loaded into the changer, play will begin from the first track of the first disc in the magazine. If a magazine was already in the changer, play will resume from the track on the disc previously in play.
dq DISC SELECT (CD+ & CD-)
These buttons are used to select the desired disc for play. To advance to a higher number disc, press the CD+ button cr. To return to a lower number disc, press the CD - button. The number of the disc in play will be shown on the display panel.
drTRACK SELECT (+ / - )
The Track Select functions are used to quickly access the beginning of a particular
track. Each time the Forward Track Select (+) side of the button is pressed, the next higher track number will be selected as shown on the display panel. Similarly, each time the Backward Track Select (
ds CUE/REVIEW FUNCTIONS ( + / - )
dt TRACK/DISC SCAN SELECTOR (SCN)
When the Scan button is pressed, the SCN indication will appear on the display panel, and the first 10 seconds of each track on the disc will be played in order. When a desired track is reached, press the Scan button twice with a one second interval between presses and play of the selected track will continue (SCN will disappear from the display panel). The Track Scan mode will also be canceled by activating another disc function (Top, Repeat or Random Play). When the Scan button is pressed twice the DISC and SCN indications will appear on the display panel and the first 10 seconds of each track on each disc in the magazine will be played in order. When a desired disc track is reached, press the Scan button again and play of the selected disc will
continue uninterrupted ( DISC and SCN will disappear from the display panel). The Disc