Bl AM/FM Band Selector Band, Bp PRE-SET Scan PS

OPERATING INSTRUCTIONS

bl AM/FM BAND SELECTOR (BAND)

Each time this button is pressed, the radio band is changed. The indication AM1, AM2, FM1, FM2 or FM3 will appear on the display panel according to your selection.

During disc play, pressing this button will stop play of the disc and switch to radio operation without ejecting the disc. During this time, the indication will remain on the display panel to show that a disc is still loaded in the unit. Press the MOD button bt to return to disc play from the beginning of the last track in play.

bmMANUAL UP/DOWN TUNING ( + /

- ) AUTOMATIC SEEK TUNING (SEEK)

To manually select a radio station,

momematrily press the Up Tuning ( + ) side of the button to advance the unit two

digits higher or the Down Tuning (-) side of the button to tune two digits lower. Pressing either side of the button for longer than 0.5 seconds and then releasing will activate the Automatic Seek Tuning function. The radio will seek the next station in the selected direction and stop at that frequency. The Seek function can be stopped by pressing the button again or activating any other tuning function.

Pressing and holding either side of the button for longer than 0.5 seconds will cause the radio to continue tuning rapidly in the selected direction until the next available station and stop there.

bn LOCAL/DISTANT SELECTOR (LOC)

This feature is used to select the strength of the signals at which the radio will stop during Automatic Seek Tuning. Pressing the button will select the Local setting (LOC will appear on the display panel) and only strong (local)

stations will be received. Pressing the button again will select the Distant setting (LOC will disappear from the display panel) and the radio will stop at a wider range of signals, including weaker (more distant) stations.

boFM MONO/STEREO SELECTOR (MONO)

During FM radio operation, this button is used to select mono or stereo reception of the broadcast signal. Under normal reception conditions, the unit should be left in the stereo mode as indicated by the ST indication on the display panel when tuned to an FM stereo signal. If the stereo signal is too noisy for comfortable listening, press the FM Mono/Stereo Selector button to switch to mono reception (the ST indication will disappear from the display panel). To return to stereo reception mode, press the button again so that the ST indication appears in the display panel.

bp PRE-SET SCAN (PS)

AUTO-STORE TUNING (AS)

Press this button momentarilyto scan the stations pre-set into the 12 memories of the AM bands or the 18 memories of the FM bands. The unit will stop at each pre-set station for 5 seconds before continuing to the next pre-set station (the pre-set number on the display panel will flash during Pre-Set Scan operation). Press the button again momentarily to stop Pre-Set Scan operation and remain on the selected frequency. If no buttons are pressed during the scan, the unit will return to the original station before the scan.

Pressing and holding the button for longer than 2 seconds will activate the Auto-Store Tuning feature which will automatically scan and enter up to 6 stations into the pre-set memories on the band in use. If you have already set the pre-set memories to your