Audiovox ACD-70 owner manual Operating Instructions, ON-OFF Power Button

OPERATING INSTRUCTIONS

5

1ON-OFF POWER BUTTON ( )

Press this button to turn the unit on or off. The unit will also turn on automatically when a com- pact disc is inserted if the ignition switch is “on”.

2VOLUME (LEVEL) CONTROL

To increase the volume level, turn the knob clockwise. The volume will increase and the level will be shown on the display panel from a minimum of VOL 00 to a maximum of VOL 39. To decrease the volume level, turn the knob counter-clockwise. The display will au- tomatically return to the normal indication 5 seconds after the last volume adjustment or when another function is activated. This con- trol is also used in conjunction with the Push Select Control button 3 to adjust the bass, treble, balance and fader levels as described in 4, 5, 6 and 7.

3PUSH SELECT CONTROL BUTTON This button, which is integral to the VOLUME

CONTROL, is used to select the audio function (volume, bass, treble, balance, or fade) whose setting is adjusted using the VOLUME CONTROL 2. Pressing the Push Select control button once will set the unit for bass adjustment (BAS will appear on the display panel) and an audible beep will occur. Pressing the button additional times will select treble adjustment (TRE on the display), balance (BAL), or fader (FAD), each accompanied by a beep tone. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

4BASS CONTROL

To adjust the bass level, first select the Bass mode by pressing the Select button 3 so the BAS indication appears on the display panel. Within 5 seconds of choosing the Bass mode, turn the Level control 2 counter-clockwise to decrease the bass