3-7. HOLDER ASSY
5 Remove the holder assy to direction of the arrow C.
1 Open the holder assy.
A
C
4 boss
3-8. MOTOR FLEXIBLE BOARD
B
2Push the convex portion toward the direction B and open the holder assy toward the direction A to erect uprightly.
3
1 Remove four solders of DC motor (sled) (M602).
4adhesive sheet
Note: Align a circular hole in the stripping paper with a circular hole in the DC motor (sled), when mounting the motor
flexible board.
2Remove two solders of
DC motor (over write head up/down) (M603).
3 Remove four solders of DC motor (spindle) (M601).
5 motor flexible board
DC motor (sled) circular hole