SECTION 3
DISASSEMBLY
Note : This set can be disassemble according to the following sequence.
Set Block Assy, Bottom Panel Block Assy, Upper LCD Module
Main Board MD Mechanism Deck Service Assy, OP Holder Assy
Motor Flexible Board
Motor, DC (M602)
“Motor, DC (M601)”, “Motor, DC (M603)”
Note : Follow the disassembly procedure in the numerical order given.
Note : When installing, fit the knobs (HOLD, SYNCHRO REC) and switches (S804, S807)
S804
S807
knob (HOLD)
knob (SYNCHRO REC) 3 screws (1.4)
6 block assy, bottom
2
hinge
4 screws (1.4) | 5 |
1 lid, battery case
lid, battery case
block assy, bottom
Note:When installing the bottom block assy, install the assy with the battery case lid open. After it is installed, close the battery case lid.
6 panel block assy, upper
4screws (1.4)
1 CN801
5 screws (1.4)
3
2