MZ-R900
3-10. HOLDER ASSY
5Remove the holder assy in the direction of arrow D.
1Open the holder assy.
A
3-11. MOTOR FLEXIBLE BOARD
1Remove four solders of “motor, DC (sled) (M602)”.
2adhesive sheet
Note: Align a circular hole in the stripping paper with a circular hole in the “motor, DC (sled)”,
when mounting the motor flexible board.
B
2 Push the convex portion toward the direction B and open the holder assy toward the direction A to erect uprightly.
3Remove the concave portion
Cin the direction of arrow C.
D
4boss
1Remove two solders of
DC motor (over write head up/down) (M603).
1 Remove four solders of “motor, DC (spindle) (M601)”.
3 motor flexible board
DC motor (sled) circular hole
10