Sony MZ-R900 service manual Section Disassembly, Disassembly Flow, Panel ASSY, Bottom

MZ-R900

SECTION 3

DISASSEMBLY

• This set can be disassembled in the order shown below.

3-1. DISASSEMBLY FLOW

SET

3-2. PANEL ASSY,	3-3. PANEL ASSY,	3-5. MAIN BOARD ASSY	3-6. “CASE ASSY, BATTERY”,
BOTTOM	UPPER SECTION		“MAIN BOARD”

3-4. “LCD MODULE”,

“PANEL ASSY, UPPER”

3-7. STRIP,	3-8. “MD MECHANISM DECK	3-9. SERVICE ASSY, OP		3-10. HOLDER ASSY
ORNAMENTAL	(MT-MZR900-171)”,	(LCX-4R)
	“CHASSIS ASSY, SET”
		3-11. MOTOR FLEXIBLE BOARD
		3-12.	MOTOR, DC (SLED) (M602)
		3-13.	“MOTOR, DC (SPINDLE) (M601)”,
			“MOTOR, DC (OVER WRITE HEAD UP/DOWN)
			(M603)”

Note: Follow the disassembly procedure in the numerical order given.

3-2. PANEL ASSY, BOTTOM

S801

5 two screws

(1.4)

knob (hold)

A

Note: On installation, adjust the position of

both two switches (S801, S802) and two knobs (hold).

S802

3 lid, battery case

1Open the

lid, battery case.

2 claw

4Close the

battery terminal (plus).

5two screws (1.4)

5 screw (1.4)

6Remove the “panel assy, bottom” in the direction of arrow A.

5