Sony MZ-300 specifications Section, Disassembly, LID ASSY, UPPER, Holder Assy, Mechanism Deck

MZ-E300

			SECTION 3
		DISASSEMBLY
• The equipment can be removed using the following procedure.
	“Lid ASSY, Upper”,			Main board
Set		Mechanism deck

Holder ASSY Optical pick-up ASSY

Note : Follow the disassembly procedure in the numerical order given.

3-1. “LID ASSY, UPPER”, HOLDER ASSY

Note : Holder ASSY installation

1.Attach the holes on Holder ASSY to the projections on right and left sides.

2.Attach Spring (POP/L) as shown in the figure.

3 Lid ASSY , Upper

1 Screws (1.4),MI

2 Move it away from projection

Holder ASSY

Reinforcement

Spring (POP/L)	4 Move it away
	from projection

5Holder ASSY

4Move it away

from projection Case ASSY

3-2. MECHANISM DECK

1Screw (MD), step

Mechanism deck

2

5Motor flexible board

7 Screws, tapping (1.7) 6 OP flexible board

4

Reinforcement 8

3 Claw

Case ASSY

4