Note
Handset may get warm during initial charging. This is normal. The handset may take a few seconds to power up.
3.3.1Replacing your batteries If there is a need to replace your batteries, always use the recommended battery type (see page 5).
!Warning
Check the battery polarity when inserting in the battery trail. Incorrect polarity may damage the product.
1Use the coin or screwdriver to turn the battery cover screw in an anticlockwise direction to unlock the cover.
2Pull open the battery trail.
3Place the new rechargeable batteries in the correct polarity as indicated into the battery trail.
Getting started
4Close the trail and turn the battery cover screw in a clockwise direction to lock the cover.
Note
Please use a coin or screwdriver that is the right shape and size for the screw that is used. Otherwise you may damage the screw when tightening it.
3.4Checking the battery level The battery icon displays the current battery level.
Battery full.
Battery is 2/3 full.
Battery is 1/3 full.
Battery is low. Require charging.
Your handset may power down shortly if it is not charged after the battery is empty. If you are on the phone when the battery is nearly empty, you will hear warning tones. Place the handset on the charger unit to recharge the batteries. Otherwise, your call may be cut off shortly after the warning.
3.5Settings before first use Before you first use your handset, you will be asked to set the language, accept an agreement and select the country where the phone is to be used.
13