16 The System
16.1Set your country
The country setting of your phone has been set during the initial set up of your phone. You can make changes to the country setting on your phone. The country code is the international calling code for a country (example, “1” for Canada), see “Country codes list” on page 52.
Please refer to glossary for details about country code, see page 64.
1Press Menu.
2Select Settings > Advanced >
Country. Press Select.
3Select the new setting. Press OK.
• The setting is saved.
!Warning
The phone may not work properly without correct country code entry.
16.2Register the handset Registration allows communication between the base unit and handset(s). If the handset cannot communicate with its base, you will not be able to make any call or use many of the functions and features on the phone.
Note
Your handset should be already registered on the base unless you have
!Warning
Make sure you have configured the language, country code, and area code of
your phone before registering additional handsets.
16.2.1Manual Registration
1 Press Menu > Settings > Phone > Registration.
2Press the Base page key for more than 3 seconds.
3Press OK on the handset.
4Enter PIN code (Default: 0000).
Press Clear to correct typing errors.
5Press OK.
•Your handset starts searching for the base.
•If registration is successful, the signal
icon displays steadily.
Tip
If registration failed, repeat the above procedure.
Note
The base can register up to 4 handsets, then the base unit registration memory is full. If you attempt to register an additional handset, the registration process will be aborted.
16.3Unregister a handset
Use one handset to unregister another handset that shares the same base unit.
1Press Menu.
2Select Settings > Phone >
3Select the new setting. Press OK.
Tip
The handset number displays beside the word “Skype” during standby. For example, Skype (1).
The System | 49 |