
4
2Turn the rotary wheel clockwise or anticlockwise to select your preferred language.
3Press the OK key to confirm the selected language.
The SRU9600 will guide you through the setup process via questions in the upper part of the display.
4Follow the instructions on the remote control.
Replacing Batteries
When the batteries are almost empty, the Battery
Low icon will start blinking, indicating the critical battery level.
Note If the Battery Low icon is blinking, you can still operate the remote control, however you will no longer be able to enter the Setup menu.
1Press the battery cover at the back of the remote control inwards and slide it in the direction of the arrow.
2Place the three L06 or AA type alkaline batteries back into the battery compartment, as shown.
3Slide the cover back on and click it firmly into place.
Please follow the local regulations for disposal of the empty batteries.
Using Your Remote Control
Selecting a Device
You select the different devices you have installed on your remote control by turning the rotary wheel clockwise or anticlockwise. The moment you stop rotating, the touch screen and the hard keys keys work for that selected device.
Using Touch Screen Keys and Hard Keys
The most frequently used functions of your devices are covered by the touch screen keys and hard keys. On the touch screen you only see the functions that are applicable for the selected device. Press the Page 2 key at the bottom of the touch screen for more functions.
Selecting Extra Functions
Devices can also have extra functions, that are not covered by the touch screen keys or the hard keys on the SRU9600. You can select these extra functions in the upper part of the display.
1Press .
The touch screen keys disappear and extra functions for the selected device appear in the upper part of the display.
2Turn the rotary wheel to scroll through all extra functions.
3If you have selected the function you were looking for, press .
The remote control sends out the IR signal and returns to the touch screen keys of the selected device.
For adding extra functions, see chapter “Add a Function” on page 6.
Tip If you cannot find the extra function you are looking for, you can exit the Jog
Mode by pressing again.