Philips SRU9600 manual Delete a Device, Fix a Key, Add a Function, Add an Activity

6

Delete a Device

You can delete a programmed device from your remote control.

1Select the option Delete a device in the Setup menu and press .

2Select the device you want to delete.

3Confirm you want to delete the device. The device is deleted.

The deleted device is available again in list of devices that you can add.

Note Keys of the deleted device that are used elsewhere, e.g. in an activity or the volume keys you copied, will be deleted as well.

Check the activities you programmed and Volume keys for your devices and reprogram them if necessary.

Fix a Key

If a hard key, touch screen key or extra function is not working properly with your device, you can learn the key from your original remote control in your SRU9600. You can learn up to 200 keys.

1Select the option Fix a key in the Setup menu

and press .

2Select the device for which you want to fix a key.

3Confirm you have a working original remote control available to learn from.

4Select the hard key, touch screen key or extra function you want to fix.

Extra functions can be selected by pressing the Jog Mode key, selecting the function with the rotary wheel and pressing OK.

5Follow the instructions on the remote control. The key is learned and fixed.

2-5 cm

Best position of the

SRU9600 and your original remote control

Note Fixing a key overwrites the key’s data that was stored in your SRU9600.

Add a Function

You can add extra functions to your SRU9600.

1Select the option Add a function in the Setup

menu and press .

2Select the device you want to add a function to.

3Select the label you want to use for the extra function.

4Learn the function from your original remote.

The extra function is added to your remote control.You can access the extra

functions by pressing .

Add an Activity

You can add activities to your SRU9600.

An activity consists of several key presses that will

be sent out by your remote control with just one key press.

By default the SRU9600 inserts a delay of 300ms between every key press to make sure your devices are responding correctly to the IR signals.You can overwrite this default delay.

■If one of your devices needs a longer delay before receiving the next IR signal, you can insert a delay of 3 seconds.

■If an activity needs no delay between the different key presses, e.g. turning up the volume, you can add the option ‘no delay’.

1Select the option Add an activity in the Setup menu and press .

2Select the label you want to use for the activity.

3Follow the instructions on the remote control.