
Controlling the Projector via LAN
Making General Settings for the Network (Network -
General)
Setting for Sending E-mail  when an Error Occurs
(Mail – Originator Settings)
On this screen, you can make general settings relating to the network.
| Items | Description | 
| Projector | Setting the projector name. | 
| Name | 
 | 
| Auto | Setting the time interval in | 
| Logout | which the projector will be | 
| Time | automatically disconnected | 
| 
 | from the network in units of a | 
| 
 | minute (from 1 to 65535 | 
| 
 | minutes). If the set value is | 
| 
 | made 0, the Auto Logout | 
| 
 | function is disabled. | 
| 
 | 
 | 
| Data Port | Setting the TCP port number | 
| 
 | used when exchanging data | 
| 
 | with the projector (from 1025 to | 
| 
 | 65535). | 
| Search | Setting the port number used | 
| Port | when searching for the | 
| 
 | projector (from 1025 to 65535). | 
After clicking the “Apply” button, the set val- ues appear. Confirm that the values are set properly, and then click the “Confirm” but- ton.
 Note
 Note
•After setting items, wait for 10 seconds and then 
•Projector Name can be up to 12 characters.
•You can input the characters below : 
(When 
On this screen, you can make settings for sending 
| Items | Setting example / Remarks | 
| SMTP | Setting an SMTP server | 
| Server | address for  | 
| 
 | sion. | 
| 
 | e.g.1 : 192.168.150.253 | 
| 
 | e.g.2 : smtp123.sharp.co.jp | 
| 
 | * When using a domain name, | 
| 
 | make settings for the DNS | 
| 
 | server. | 
| 
 | 
 | 
| Originator | Setting the projector’s  | 
| address. The  | |
| Address | here becomes Originator  | 
| 
 | Address. | 
| Originator | Setting the sender’s name. | 
| Name | The name set here appears in | 
| 
 | the “Originator Name” column | 
| 
 | of the body of the message. | 
 Note
 Note
•SMTP Server, Originator 
•You can input the characters below:
SMTP Server and Originator 
(You can input “@” only one time for “Origi- nator 
Originator Name : 
•If the settings of “3. Setting up a Network Connection for the Projector” on pages 13 and 14 are incorrectly set, 
 -18
-18