Sharp PG-F320W When Connecting Using Telnet, ClickStartfrom theWindows desk- top and select Run

Setting up the Projector Using RS-232C or Telnet

When Connecting Using Telnet

1 Click“Start”from theWindows® desk- top and select “Run”.

2 Enter“telnet 192.168.150.2”in the text box that opens up. (If the IP address of the projector is 192.168.150.2.)

3 Click the “OK” button.

4 “User Name:” is displayed. Input the user name and press the “Enter” key.

•If a user name has not yet been set, just press the “Enter” key.

5 “Password:” is displayed. Input the password and press the“Enter”key.

•If a password has not yet been set, just press the “Enter” key.

6 Input “setup” and press the “Enter” key.

▼SETUP MENU

---------------------------------	SETUP MENU--------------------------------
[1]IP Address	[2]Subnet Mask	[3]Default Gateway
[4]User Name	[5]Password
[6]RS-232C Baud Rate	[7]Projector Name	[8]DHCP Client
[A]Advanced Setup		[D]Disconnect All
[V]View All Setting	[S]Save & Quit	[Q]Quit Unchanged
setup>

Note

•If the IP address has been changed, be sure to enter the new IP address in step 2.

•User name and password are not set in the fac- tory default settings.

•If the user name or password is entered incor- rectly three times in steps 4 or 5, SETUP MENU will be quit.

•SETUP MENU will be displayed.

-21