Sharp PG-F320W specifications Resetting the Lamp Timer of the Projector via LAN

Resetting the Lamp Timer of the Projector via LAN

When the projector is connected to a network, you can use HyperTerminal or a similar com- munications program to send a command to reset the lamp timer. The example below uses Windows® XP as the operating system.

1 Click “Start” – “All Programs” – “Accessories” – “Communica- tions” – “HyperTerminal”.

•If you do not have HyperTerminal in- stalled, see the operation manual of your computer.

•Depending on the settings of your com- puter, you may be required to enter your area code and other details. Enter the information as required.

2 Enter a name in the “Name”field, and click “OK”.

3 If you are required to enter the area code, enter it in the “Area

code” field. From the “Connect

using” drop-down menu, select

“TCP/IP (Winsock)”, and click

“OK”.

4 Enter the IP address of the pro- jector in the “Host address” field (see “TCP/IP” on the “Network” menu of the projector), and en- ter the data port of the projector in the “Port number” field (“10002” is the factory default setting), and click “OK”.

Select

“TCP/IP (Winsock)”

-30