Sony CMD-J5/J16 specifications Section Disassembling / Testing, Disassembly

Page 11

SECTION 4 DISASSEMBLING / TESTING

4.1Disassembly

IMPORTANT NOTE :

The IMEI number is the electronic identification of the hardware, which is stored electronically. There should be no discrepancy between the number on the sticker and the number within the set memory allowed.

In case of replacing the lower cabinet it is to make sure that the IMEI Sticker mounted on the lower case (visible from the battery compartment) will be replaced to the new housing part as well.

Follow the disassembly procedure in the numerical order given.

CABINET UPPER

MAIN BOARD ASS’Y

Image 11

Contents CMD-J5/J16 ESD Handling precautions Table of Contents DCS Section General DescriptionsMulti-band Preferences GSM Radio Frequency Power LevelsSpeech Codec LanguagesBattery Capacity Battery ChargingBattery Safety Connector layout Accessory InterfaceJog Dial Basic Features of the CMD-J5/J16Section Operating Instructions Parts and ControlsVoicemail Key Side SwitchSecurity Codes Centre KeyMenu Overview Icon GlossaryDisassembly Section Disassembling / TestingDo not detach the shield case from the main board Cabinet LowerInterface to GSM-Tester CMD- J 5/J Battery Pack Test SIM Card Service Test ConnectorJigs & Tools Level Test Procedure with GSM Tester recommendationSoftware set-up Programming InstructionsRequirement Hardware set-up2 ∗ Save Personal Data in Mobile Get Data / Write Data − The default values areTransmitter Section DiagramsBlock Diagram Radio Frequency RF General RF IndicationsGeneral Baseband Indications Block Diagram BasebandMultiactor Loudspeaker /Ringer Vibrator Block Diagram AudioHeadset Connector Headphone Jack General Audio IndicationsSony Corporation Section Spare Parts and Accessories List