Section 5
PROGRAMMING INSTRUCTIONS
5.1Requirement
•PC (486 type or higher) with Microsoft “Windows” Operating System
•One
•The Data Transfer Cable (p/n
PREPARATION FOR SOFTWARE UPDATE
DATA
TRANSFER
CABLE
5.2Hardware set-up
•Copy all the files to the PC (define own directory).
•Connect the Data Transfer Jig to the PC
•Attach battery pack to
•The initial settings of the flash.exe program may not correspond with the normally correct settings. It is highly advisable to check the settings first (see 5.3 Software
5.3Software set-up
5.3.1 ∗ Download Software to Mobile (Software Update)
• Start the program flash.exe by | J5 Flash.exe |
15