Sony CMD-J5/J16 specifications ESD Handling precautions

Power requirements	3.9 V (nominal)
Operating temperature	-10°C to +55°C
Accessories operating temperature	± 0°C to +45°C
Connectors	External RF connector
	Bottom Connector (12-pin flat I/O connector)
	Mini plug head set jack
Supplied accessories	AC Adapter	QN-3TC
	Battery (std.)	QN-J5BPS
	AC cable
Optional accessories	Headset	QN-3HS
	Battery (std.)	QN-J5BPS

NOTE

This device contains electrostatically sensitive components. Damage can occur to these components if the appropriate handling is not adhered to.

ESD Handling precautions:

A working area in which Digital Cellular Telephones may be safely handled without undue risk of damage from electrostatic discharge must be available.

The area must be equipped as follows:

All working surfaces must have a dissipative bench mat, safe for use with live equipment, connected via 1.2MΩ resistor to a common ground point.

A quick release skin contact device with a flexible cord, which has a built-in safety resistor of a range between 5.2KΩ and 1.2MΩ shall be used. The flexible cord must be attached to a dissipative earth point.

All containers and storage must be of the conductive type.

2