Security Codes, Centre Key, Voicemail Key

•The Centre Key

Press the Centre Key in standby mode to access the Main Menu.

During a call, press the Centre Key to access the Call Menu.

In Sub-menus, access/exit the help function by pressing the Centre Key

Press and hold to access your Voicemail

In standby mode, slide the switch up to activate/deactivate the manner modes.

Afterwards, it is possible to switch among the manner mode functions. All manner mode icons appear in the display; rotate the Jog Dial to select one:

Silent Mode :turns the ringer and all tones to silent mode.

Ringer to Single beep :ringer is restricted to a discrete single beep.

Vibra Alert :Vibra Alert without the ringer.

For your convenience, sliding the side switch up in standby mode will toggle between the two last settings.

In standby mode, slide the switch down to lock/unlock your keypad (including Jog Dial). It is still

possible to make emergency calls (112) as well as answer/reject an incoming call (by pressing / ) when the keypad is locked.

During a call, turn the loudspeaker on by sliding the switch up once. Turn the loudspeaker off by sliding the switch up again.

During an incoming call, stop the ringer by sliding the side switch up.

During a game, stop/start the backround sound by sliding the side switch up.

CODE TYPE	NUMBER OF	DESCRIPTION
CODE TYPE	DIGITS	DESCRIPTION
	DIGITS

PIN	4 to 8	Controls SIM security. Supplied by the
Personal Identification Number	4 to 8	Service Provider !
Personal Identification Number		Service Provider !

PIN 2	4 to 8	Controls memory security. Supplied by the
PIN 2	4 to 8	Service Provider !
		Service Provider !

		Used to unblock PIN and PIN 2.
		A PIN or PIN 2 will become blocked if the wrong
PIN / PIN 2		PIN or PIN 2 is entered three times.
Personal Unblocking Key	8	When the blocked PIN or PIN 2 is unblocked, a
(PUK / PUK 2)	8	new PIN or PIN 2 must be entered. If the wrong
(PUK / PUK 2)		new PIN or PIN 2 must be entered. If the wrong
		PUK or PUK 2 is entered 10 times, the SIM card
		will be unusable.
		Supplied by the Service Provider !

		Controls the call bar function. If the wrong
Bearing Password	4	password is entered three times, this
Bearing Password	4	service will be revoked.
		service will be revoked.
		Supplied by the Service Provider !

		Controls the access to wap-and e-mail settings.
Security Code	4 to 8	The default Security Code is: 0000
		Refer to Section 5 “Programming Instructions”