•Select “file”/”Settings…” and check if the settings for the “Com Port”and “Speed” are correct.
−The FlashLoader automatically detects all available Com ports on the PC. (COM 1 or COM 2)
−Baud rates up to 812500bps will be supported, but standard PCs, unless it is correctly customised (i.e. with a Fast Serial Board), will not support Baud rates > 115200bps.
− The default values are |
|
|
| 0 | |
11520 | |||||
COM1 |
•Click on the “Load” button and select an SRE file for downloading.
−The
−Any other SRE file is either only needed for the program itself, or can be a personal data file. Note: If a “flash.sre” file appears, please mind that this is application software (do not use / modify)
−Flash erase area is automatically calculated with the contents of the file.
•Switch on the
•Now the program runs automatically.
5.3.2∗ Save Personal Data in Mobile (Get Data / Write Data)
The
•Check if the settings for the “Com Port” and “Speed” are correct.
•Click on “Get Data”.
•Switch on the
•When the read data is downloaded either reload it in another mobile (reconnect a new mobile and click on “Write Data”) or save it on the disc using File/Save option.
5.3.3∗ Reset of Personal Data (Erase Data)
The
•Check if the settings for the “Com Port” and Speed” are correct.
•Click on “Erase Data”.
•Switch on the
•All individual settings (such as Phonebook entries and WAP settings etc.) will be deleted.
5.3.4∗ Reset of Security Code Lock (Clear Lock)
The
•Check if the settings for the “Com Port” and Speed” are correct.
•Click on “Clear Lock”.
•Switch on the
•The individual Security Code will be reset to the default setting: 0000 !
For any of the above stated functions, follow the instructions written in the status bar (the first one from the top).
Follow up the progress of the up/download process by checking the Progress bar (the second one from the top).
16