Step 4. To Start:
Press the Start/Cancel Button to start the defrosting process. The red Start/Cancel Button light will illuminate. The LCD Display will show the Defrosting function, the countdown time and the selected temperature. The unit will begin to work and the timer will start counting down.
When the Defrosting cycle is complete, the unit will emit 3 beeps. The LCD and the Start/Cancel Button Light will turn off after 30 seconds.
NOTE: You can cancel the defrosting cycle at any time by pressing the Start/Cancel Button once.
Using the Reheat Function (See Fig. 11)
Step 1. Turn the Function Knob to the Reheat function.
Default Temperature: 325ºF.
Default Time: 15 minutes.
You may manually activate the Turbo Convection Heat by pressing the Turbo button once to turn it on. The blue light of the Turbo button will turn on.
Step 2. To set the temperature:
Turn the Temperature/Time Knob if you wish to increase or decrease the temperature setting. The frame around the temperature setting on the LCD display will be blinking. For the Reheat function, the temperature can be set from 150 to 450ºF in
English-18
Figure 11 |