Sharp MX-M232D, MX-M182 manual Button Manager Settings, Button Manager scan menu factory default

SCANNER FUNCTIONS

BUTTON MANAGER SETTINGS

Once installed, Button Manager normally runs in the background in the Windows operating system. If you need to change Button Manager settings, follow the steps below.

For details on Button Manager settings, see Button Manager Help. "BUTTON MANAGER" (p.73)

1 Right-click the Button Manager icon ( ) on the task bar, and select "Settings" from the pop-up menu.

The setting screen of

Button Manager will open.

If the Button Manager icon does not appear Note on the task bar, click the "Start" button, select

"All Programs" ("Programs" in Windows 2000), select "Sharp Button Manager AA", and then click "Button Manager" to start Button Manager.

2 Click the tab of the scan menu that you want to set up.

3 Select the start-up application in the "Application Selection" area.

When the "Show TWAIN setting screen when Note scanning" checkbox is selected, the scan

setting screen appears when scanning is executed to let you adjust the scanning conditions.

Button Manager scan menu (factory default)

Display/Button		Application that starts
Manager menu
	SC1:	Sharpdesk
	SC2:	Email
	SC3:	FAX
	SC4:	OCR
	SC5:	Microsoft Word
	SC6:	Filing
Note	The start-up application must be installed
	before using.

4 Set up the "Colour Mode", "Edge" and other scan settings in the "Scan Setup" area.

•If you placed a two-sided original in the RSPF, select "Duplex-Book" or "Duplex-Tablet" as appropriate for the position of the binding on the original.

•The name of the tab can be changed. Click the "Menu Name" button and enter a new name. After entering a name, click the "Apply" button or "OK" button. This also changes the scan destination name that appears on the machine. (Example: SC1: XXXXX)

•	If you selected "Duplex-Book" or
Note	"Duplex-Tablet" from the "Scanning Side"
	menu, select "Right edge is fed first" or
	"Top edge is fed first" for the orientation of
	the original.
•	For original sizes for which two-sided
	scanning is possible, see "SINGLE PASS
	FEEDER/REVERSING SINGLE PASS
	FEEDER" (p.107).
•	Some settings cannot be selected in	5
	some applications.
•	When "Show TWAIN setting screen when
	scanning" is selected, only "Menu name"
	can be selected.

5 Click the "OK" button.

This completes the settings.

74