Display turns off, Start indicator blinks

TROUBLESHOOTING

Problem		Cause and solution	Page

	Any other indicators turned off.		22
	→ If other indicators are lit, the machine is in "Preheat mode". Press		22
The display turns off.	any key on the operation panel to resume normal operation.

	START indicator blinks.		22
	START indicator blinks.
	→ The machine is in auto power shut-off mode. Press the [START]
	key (	) to resume normal operation.

	The same power outlet being used is for the lighting
Lighting fixture flickers.	fixture and the machine.		–
Lighting fixture flickers.	→ Connect the machine to a power outlet which is not used for other		–

	electric appliances.

Page 87

Image 87

Sharp MX-M232D manual Problem Cause and solution Any other indicators turned off, Display turns off, Start indicator blinks

Contents

MX-M182D MX-M202D MX-M232D Model MX-M182 Contents 104 100101 103 113 110111 112 Meaning of R in Original and Paper Size Indications Using the ManualIntroduction About the Manuals Rspf Differences Between ModelsConventions Used in this Manual SPF Before Software Setup SoftwareHardware and Software Requirements Double-click the Setup icon Installing the SoftwarePower on the Machine Turn the power switch to the on position Click the MFP Driver button When installing is finished, click the Close button This completes the installation of the software Interface cable Connecting to a ComputerConnecting a USB Cable System requirements for USB 2.0 Hi-Speed mode Using the Machine AS a Shared Printer Click the Next buttonYou will return to the window of . Click the Close button Configuring the Printer Driver Click the OK button Setting UP Button ManagerWindows XP/Vista/7 Click the Sharp MX-XXXX icon and select Properties Select Sharp Button Manager AA in Send to this application Windows Troubleshooting Driver cannot be installed Windows 2000/XPPlug and Play window does not appear Select the driver from the list, and remove the software Click Uninstall a programRemoving the software Click the Start button, and then click Control Panel Part Names and Functions Right side cover when the SPF/RSPF is installed Document cover when installedOriginal guides when the SPF/RSPF is installed Feeding roller cover when the SPF/RSPF is installed Operation Panel Auto Image key Start key / indicatorPaper Select key Copy Ratio key 100% Example Copy modeOperation in COPY, PRINT, SCAN, and FAX Modes Display base screen Power save modes Power on and OFFPower on Power OFF Special papers Paper tray type Paper type Size Weight CapacityLoading Paper Paper Gently push the paper tray into the machine Loading PaperLoading the paper tray Push the pressure plate down Important points when inserting paper in the bypass tray Loading the bypass trayUnfold the bypass tray Paper Size SET Changing the Paper Size Setting of a TrayEnvelopes Copy Auto Disabling Enabling Auto Tray SwitchingAuto Tray Switching Paper Copies MADE000,000 REMAINING050,000 Auditing ModeNumber of Accounts in Auditing Mode Using Auditing Mode Make sure that the desired paper tray is selected Normal CopyingCopying from the document glass Close the SPF/RSPF Copy is delivered to Copying from the SPF/RSPFPress the Start key to begin Copying Originals that can be used in the SPF/RSPF Stream feeding modeRemoving the document cover Copying books or originals with folds or creases Points concerning the position of the printed copy image Text Making a Copy Darker or LighterAuto Text/photo Selecting the Tray Setting the Number of CopiesAuto tray switching when there are two or more paper trays Important note when making a large number of copies Selecting an inch original size Selecting the Original SizeORIG. Size Enter ORIG. Size Enter Inch Size Input ExtraOKORIG. Size Enter Extra Press the Auto Image key Reducing or Enlarging a CopyAutomatic Ratio Selection Press the Paper Select key to select the desired tray Manual Ratio Selection Preset Copy RATIOS/ZOOM Copy Ratio86% 100% Margin Shift Modes Set the vertical ratio with the , , , or keys AdjustXY Zoom OFF Glass Automatic TWO-SIDED Copying MX-M182D/MX-M202D/MX-M232DOriginal → Paper Usable paper Document Select 1 to 2 with the or key, or with the 2-SIDED Copy key TWO-SIDED Copying of ONE-SIDED OriginalsBinding Change OFF Press the 2-SIDED Copy key Copy Mode Binding Change on Select 2 to 2 with the or key, or with the 2-SIDED Copy key Select 2 to 1 with the or key, or with the 2-SIDED Copy key Copy Mode Place original B as shown below TWO-SIDED Copying Using the Bypass Tray Checkmark appears Dual page CopyingErase Dual Copy Okoff Replace the previous originals and press the Start key Interrupting a Copy RUN Sort copy Group copy Convenient Copy FunctionsSort COPY/GROUP Copy This section explains major convenient copy functions Offset function Offset function enabled Offset function disabledSort Sort 1 Copy Pattern OkchangeOK2in1/4in1 2in1 Right Margin Shift OFF Down Centre Erasing Shadows around the Edges of a CopyErase Edge Select the erasure width with the or key Card Shot SIZEmmCard Shot Front side of the card is scanned A5-A3 Size Factory default setting ID Card CopyFront Back Centre Line Press the Start key Basic Printing OnlineOffline Make sure that Sharp MX-xxxx is selected as the printer Pausing a Print JOBWhen the job separator tray is Note installed If the Tray Runs OUT of Paper During Printing Click the Printing Preferences button in the General tab Opening the Printer Driver from the Start Button Printer Driver Setting Screen Printing Multiple Pages on ONE A3 or Ledger Rotating the Print Image 180 DegreesRotate 180 degrees Check the Fit To Paper Size button Select the zoom ratio Click the Advanced tab in the printer driver setup screenPrinting Faint Text and Lines in Black Text To Black/Vector To Black Printing a Watermark Adjusting the Brightness and Contrast of the ImageHow to Print a Watermark To adjust a setting, drag Slide bar or Click the or button Bound at the side Bound at the top TWO-SIDED PrintingPrinting result Sided Book Sided Tablet Vertical Horizontal Using saved settings Saving Frequently Used Print SettingsSaving Settings AT the Time of Printing User Settings Outline of the Print Status Window Scanning Overview SC4 Scanning Using the Keys on the MachineSC2 SC3 Scan Setup area Set the scan conditions Click to save your settings and exit the dialog boxButton Manager This completes the settings Button Manager SettingsButton Manager scan menu factory default Setting screen Button Manager will open Select Sharp MFP Twain AA, and click the Select button Only when using the RspfScanning from Your Computer Scanning from a TWAIN-COMPLIANT Application Specify the scanning area and set the scan preferences When you are ready to begin scanning, click the Scan button Set-up screen Scanner driver settings Image Size button Preview screenPreview screen Rotate button Scan screen WIA driver will appear Click the Scan button Scanner and Camera Wizard will appear Scanning from the Scanner and Camera Wizard Windows XP Click the Finish button MACHINE/COPYING Problems Printing and Scanning ProblemsThis chapter describes troubleshooting and misfeed removal MACHINE/COPYING Problems Pieces of paper inside machine Problem Cause and solution Misfeed occursPaper is outside of the specified size and weight Range Paper is not loaded properly Automatically selected or the copy Display or the Data indicator is blinkingOriginal is curled or folded Original has many solid black areas Original size is not Problem Cause and solution Any other indicators turned off Start indicator blinksDisplay turns off Printing and Scanning Problems Uneven Orientation of document setting is not correctPrinted, but the print data has not 117 Been printed completely Poor scanning quality You have not specified a suitable resolutionBrightness and contrast settings are not suitable Lighter than expected There is not enough machine memory MB of expansion memory Message Action Section B Misfeed RemovalMisfeed in the SPF/RSPF Remove the misfed original Section C Misfeed in the Bypass Tray Misfeed in the Machine Misfeed in the paper feed areaClose the front cover and side cover Injury Misfeed in the fusing area Misfeed in the transport area Close the side coverBe careful not to tear the misfed paper during removal Misfeed in the Upper Paper Tray Close the upper paper trayPush the upper paper tray in completely Close the lower side cover Misfeed in the Lower Paper TrayOpen the lower side cover Remove the misfed paper Replacing the Toner Cartridge Required indicator Checking the Total Output Count Routine Maintenance Cleaning the Document Glass and SPF/RSPF/DOCUMENT Cover Routine Maintenance Cleaning the Transfer Charger Cleaning the Bypass Tray Paper Feed Roller Display Contrast Adjusting the Display ContrastContrast of the display can be adjusted as explained below ORIG. Size Specifications Printer and Scanner SpecificationsPrinter Function Scanner Function Optional Equipment Dimensions Single Pass FEEDER/REVERSING Single Pass FeederDocument Cover AR-D36 AR-D37 Power supplySheet Paper Feed UNIT/2 X 250-SHEET Paper Feed Unit Part names Store paper in the wrapper and lying flat Storage of SuppliesProper Storage Store the supplies in a location that is Programming AN Administrator Password Programs for Copy Mode Programming AN Administrator Password System SettingsChange Admin PW Program name System Settings ListPrograms for Copy Mode Programs for general use of the machine Copier Using the System Settings Account Control Auditing ModeReset Account Reset 1 ACC ACC. # Control ACC. # ControlDelete Change ACC. # Security Cancel Jobs of Invalid AccountsAccount Limit Single ACC. Limit Offset Function Waiting Copy Lamp SettingUSB2.0 Mode Device Control Operation Setting Keys Touch Sound AT Initial Point Disable Auto KEY RepeatDisable Paper Size SET KEY Touch Sound Energy Save Erase Adjust Copy SettingsExposure Adjust Margin Default Stream Feeding Card Shot DefaultDefault Tray SET Default Exposure Sort Auto Select Photo Mode DefaultDisable Auto Paper Selection Disable 2-SIDED Copy Operation Guide

Sharp MX-M232D Problem Cause and solution Any other indicators turned off, Display turns off

Models: MX-M182D MX-M202D MX-M232D MX-M182

TROUBLESHOOTING

Problem

Cause and solution

Any other indicators turned off.

The display turns off.

START indicator blinks.