Sharp MX-M202D manual Original is curled or folded, Automatically selected or the copy, Finished

TROUBLESHOOTING

Problem		Cause and solution	Page
	Was the SPF/RSPF (or document cover) opened
	completely when the original was placed on the document		43
	glass?
	→ Open the SPF/RSPF completely and then place the original on the
		document glass. Close the SPF/RSPF (or document cover).
	The original is curled or folded.		–
	→ The original size cannot be correctly detected if the original is
		curled or folded. Straighten the original.
	The original has many solid black areas.
The original size is not	→ If the original includes solid black areas, the original size may not		–
		be detected automatically. Press the [SPECIAL FUNCTION] key
automatically selected or the copy
		and select "ORIG. SIZE ENTER" to specify the original size.
is not made on paper that matches
	The machine is directly exposed to sunlight.
the size of the original.			–
	→	Install in a location that is not exposed to sunlight.
	The original is smaller than A5 (5-1/2" x 8-1/2") size.
	→ If the original is smaller than A5 (5-1/2" x 8-1/2"), the size cannot		36
		be detected. Follow the procedure in "USING THE BYPASS
		TRAY TO COPY A SPECIAL SIZE ORIGINAL" to make the copy.
	The original is not a standard size.
	→ If the original is a small non-standard size, the size cannot be		36
		detected. Manually select a size close to the original size, or
		follow the procedure in "USING THE BYPASS TRAY TO COPY A
		SPECIAL SIZE ORIGINAL" to make the copy.
	The document glass or the underside of the document
	cover/SPF/RSPF is dirty.		101
Copies are smudged or dirty.	→ Clean regularly.
	Original smudged or blotchy.		–
	→	Use a clean original.
	The scanner glass for the SPF/RSPF is dirty.		101
White or black lines appear on	→	Clean the long, narrow scanning glass.
copies.	The transfer charger is dirty.		102
	→	Clean the transfer charger.
	Copying or printing is performed.		–
	→	Set the paper size after copying or printing is complete.
	The machine has stopped temporarily due to running out
	of paper or a misfeed.		24, 92
Paper size for a paper tray cannot	→ Load paper or remove the misfeed, and then set the paper size.
be set.
	An interrupt copy job is in progress.		48
	→	Set the paper size after the interrupt copy job is finished.

The display or the DATA indicator is blinking.

	→ Data is being held in memory. Print the data in memory or clear it		49, 51
		from memory.
	The paper output tray is full.
	→ Long copy runs are automatically paused every 250 copies.		34
A copy job stops before it is		Remove the copies in the paper output tray and press the
finished.		[START] key ( ) to resume copying.
	The tray is out of paper.		24
	→	Load paper.

85