TROUBLESHOOTING

Section C

Remove the misfed original from the exit area.

If the misfed original cannot be easily removed from the exit area, open the moveable part of the document feeder tray and remove the original.

3 Return the originals indicated by the minus number in the display to the document feeder tray and press the [START] key ( ).

Copying will resume from the originals that still remained when the misfeed occurred.

2 Open and close the SPF/RSPF to make the misfeed location indicator stop blinking.

You can also make the misfeed indicator stop blinking by opening and closing the feeding roller cover or the right side cover.

MISFEED IN THE BYPASS TRAY

1 Gently pull the misfed paper out.

2 Open and close the side cover.

The message " Clear paper path." will be cleared and copying will be possible.

Note

• When closing the side cover, press down on

the handle.

If the message does not clear, check again to make sure that no pieces of paper remain.

93

Page 94
Image 94
Sharp MX-M202D, MX-M182D, MX-M232D manual Misfeed in the Bypass Tray, Section C