Cleaning the Bypass Tray Paper Feed Roller | Sharp MX-M232D specs

ROUTINE MAINTENANCE

CLEANING THE BYPASS TRAY PAPER FEED ROLLER

If misfeeds occur frequently when feeding envelopes, thick paper, etc. through the bypass tray, wipe the paper feed roller at the feed slot of the bypass tray with a soft, clean cloth dampened with alcohol or water.

Paper feed roller

CLEANING THE TRANSFER CHARGER

If copies start becoming streaky or blotchy, the transfer charger may be dirty.

Clean the charger using the following procedure.

1 Turn the power switch off.

2 Open the bypass tray and the side cover.

5 Set the charger cleaner onto the transfer charger and gently slide the cleaner in the direction indicated by the arrow two or three times.

If the white sheet metal is smudged with toner, wipe it with a soft, clean cloth.

3 Lift and pull out the upper paper tray.

4 Take the charger cleaner out by holding the tab.

Slide the charger cleaner from one end to the Note other end along the groove of the transfer

charger. If the cleaner is stopped on the way, smudges on copies may occur.

6 Return the charger cleaner to its original position. Close the upper

paper tray. Close the side cover by 7 pressing the handle on the cover.

7 Turn the power switch on.

Charger cleaner

102

Image 103

Sharp MX-M232D, MX-M182D, MX-M202D manual Cleaning the Bypass Tray Paper Feed Roller, Cleaning the Transfer Charger

Contents

MX-M182D MX-M202D MX-M232D Model MX-M182 Contents 104 100101 103 113 110111 112 Meaning of R in Original and Paper Size Indications Using the ManualIntroduction About the Manuals Rspf Differences Between ModelsConventions Used in this Manual SPF Software Before Software SetupHardware and Software Requirements Double-click the Setup icon Installing the SoftwarePower on the Machine Turn the power switch to the on position Click the MFP Driver button When installing is finished, click the Close button This completes the installation of the software Interface cable Connecting to a ComputerConnecting a USB Cable System requirements for USB 2.0 Hi-Speed mode Click the Next button Using the Machine AS a Shared PrinterYou will return to the window of . Click the Close button Configuring the Printer Driver Click the OK button Setting UP Button ManagerWindows XP/Vista/7 Click the Sharp MX-XXXX icon and select Properties Select Sharp Button Manager AA in Send to this application Windows Driver cannot be installed Windows 2000/XP TroubleshootingPlug and Play window does not appear Select the driver from the list, and remove the software Click Uninstall a programRemoving the software Click the Start button, and then click Control Panel Part Names and Functions Right side cover when the SPF/RSPF is installed Document cover when installedOriginal guides when the SPF/RSPF is installed Feeding roller cover when the SPF/RSPF is installed Operation Panel Auto Image key Start key / indicatorPaper Select key Copy Ratio key 100% Example Copy modeOperation in COPY, PRINT, SCAN, and FAX Modes Display base screen Power save modes Power on and OFFPower on Power OFF Special papers Paper tray type Paper type Size Weight CapacityLoading Paper Paper Gently push the paper tray into the machine Loading PaperLoading the paper tray Push the pressure plate down Loading the bypass tray Important points when inserting paper in the bypass trayUnfold the bypass tray Paper Size SET Changing the Paper Size Setting of a TrayEnvelopes Copy Auto Disabling Enabling Auto Tray SwitchingAuto Tray Switching Paper Copies MADE000,000 REMAINING050,000 Auditing ModeNumber of Accounts in Auditing Mode Using Auditing Mode Make sure that the desired paper tray is selected Normal CopyingCopying from the document glass Close the SPF/RSPF Copy is delivered to Copying from the SPF/RSPFPress the Start key to begin Copying Originals that can be used in the SPF/RSPF Stream feeding modeRemoving the document cover Copying books or originals with folds or creases Points concerning the position of the printed copy image Text Making a Copy Darker or LighterAuto Text/photo Selecting the Tray Setting the Number of CopiesAuto tray switching when there are two or more paper trays Important note when making a large number of copies Selecting an inch original size Selecting the Original SizeORIG. Size Enter ORIG. Size Enter Inch Size Input ExtraOKORIG. Size Enter Extra Press the Auto Image key Reducing or Enlarging a CopyAutomatic Ratio Selection Press the Paper Select key to select the desired tray Copy Ratio Manual Ratio Selection Preset Copy RATIOS/ZOOM86% 100% Margin Shift Modes Set the vertical ratio with the , , , or keys AdjustXY Zoom OFF Glass Automatic TWO-SIDED Copying MX-M182D/MX-M202D/MX-M232DOriginal → Paper Usable paper Document Select 1 to 2 with the or key, or with the 2-SIDED Copy key TWO-SIDED Copying of ONE-SIDED OriginalsBinding Change OFF Press the 2-SIDED Copy key Copy Mode Binding Change on Select 2 to 2 with the or key, or with the 2-SIDED Copy key Select 2 to 1 with the or key, or with the 2-SIDED Copy key Copy Mode Place original B as shown below TWO-SIDED Copying Using the Bypass Tray Checkmark appears Dual page CopyingErase Dual Copy Okoff Replace the previous originals and press the Start key Interrupting a Copy RUN Sort copy Group copy Convenient Copy FunctionsSort COPY/GROUP Copy This section explains major convenient copy functions Offset function Offset function enabled Offset function disabledSort Sort 1 Copy Pattern OkchangeOK2in1/4in1 2in1 Right Margin Shift OFF Down Centre Erasing Shadows around the Edges of a CopyErase Edge Select the erasure width with the or key SIZEmm Card ShotCard Shot Front side of the card is scanned ID Card Copy A5-A3 Size Factory default settingFront Back Centre Line Press the Start key Online Basic PrintingOffline Make sure that Sharp MX-xxxx is selected as the printer Pausing a Print JOBWhen the job separator tray is Note installed If the Tray Runs OUT of Paper During Printing Click the Printing Preferences button in the General tab Opening the Printer Driver from the Start Button Printer Driver Setting Screen Printing Multiple Pages on ONE A3 or Ledger Rotating the Print Image 180 DegreesRotate 180 degrees Check the Fit To Paper Size button Select the zoom ratio Click the Advanced tab in the printer driver setup screenPrinting Faint Text and Lines in Black Text To Black/Vector To Black Printing a Watermark Adjusting the Brightness and Contrast of the ImageHow to Print a Watermark To adjust a setting, drag Slide bar or Click the or button Bound at the side Bound at the top TWO-SIDED PrintingPrinting result Sided Book Sided Tablet Vertical Horizontal Using saved settings Saving Frequently Used Print SettingsSaving Settings AT the Time of Printing User Settings Outline of the Print Status Window Scanning Overview SC4 Scanning Using the Keys on the MachineSC2 SC3 Click to save your settings and exit the dialog box Scan Setup area Set the scan conditionsButton Manager This completes the settings Button Manager SettingsButton Manager scan menu factory default Setting screen Button Manager will open Select Sharp MFP Twain AA, and click the Select button Only when using the RspfScanning from Your Computer Scanning from a TWAIN-COMPLIANT Application Specify the scanning area and set the scan preferences When you are ready to begin scanning, click the Scan button Set-up screen Scanner driver settings Image Size button Preview screenPreview screen Rotate button Scan screen WIA driver will appear Click the Scan button Scanner and Camera Wizard will appear Scanning from the Scanner and Camera Wizard Windows XP Click the Finish button Printing and Scanning Problems MACHINE/COPYING ProblemsThis chapter describes troubleshooting and misfeed removal MACHINE/COPYING Problems Pieces of paper inside machine Problem Cause and solution Misfeed occursPaper is outside of the specified size and weight Range Paper is not loaded properly Automatically selected or the copy Display or the Data indicator is blinkingOriginal is curled or folded Original has many solid black areas Original size is not Start indicator blinks Problem Cause and solution Any other indicators turned offDisplay turns off Printing and Scanning Problems Uneven Orientation of document setting is not correctPrinted, but the print data has not 117 Been printed completely Poor scanning quality You have not specified a suitable resolutionBrightness and contrast settings are not suitable Lighter than expected There is not enough machine memory MB of expansion memory Message Action Section B Misfeed RemovalMisfeed in the SPF/RSPF Remove the misfed original Section C Misfeed in the Bypass Tray Misfeed in the paper feed area Misfeed in the MachineClose the front cover and side cover Injury Misfeed in the fusing area Close the side cover Misfeed in the transport areaBe careful not to tear the misfed paper during removal Close the upper paper tray Misfeed in the Upper Paper TrayPush the upper paper tray in completely Close the lower side cover Misfeed in the Lower Paper TrayOpen the lower side cover Remove the misfed paper Replacing the Toner Cartridge Required indicator Checking the Total Output Count Routine Maintenance Cleaning the Document Glass and SPF/RSPF/DOCUMENT Cover Routine Maintenance Cleaning the Transfer Charger Cleaning the Bypass Tray Paper Feed Roller Display Contrast Adjusting the Display ContrastContrast of the display can be adjusted as explained below ORIG. Size Specifications Specifications Printer and ScannerPrinter Function Scanner Function Optional Equipment Single Pass FEEDER/REVERSING Single Pass Feeder DimensionsDocument Cover AR-D36 AR-D37 Power supplySheet Paper Feed UNIT/2 X 250-SHEET Paper Feed Unit Part names Store paper in the wrapper and lying flat Storage of SuppliesProper Storage Store the supplies in a location that is Programming AN Administrator Password Programs for Copy Mode System Settings Programming AN Administrator PasswordChange Admin PW Program name System Settings ListPrograms for Copy Mode Programs for general use of the machine Copier Using the System Settings Account Control Auditing ModeReset Account Reset 1 ACC ACC. # Control ACC. # ControlDelete Change ACC. # Security Cancel Jobs of Invalid AccountsAccount Limit Single ACC. Limit Offset Function Waiting Copy Lamp SettingUSB2.0 Mode Device Control Operation Setting Keys Touch Sound AT Initial Point Disable Auto KEY RepeatDisable Paper Size SET KEY Touch Sound Energy Save Erase Adjust Copy SettingsExposure Adjust Margin Default Stream Feeding Card Shot DefaultDefault Tray SET Default Exposure Sort Auto Select Photo Mode DefaultDisable Auto Paper Selection Disable 2-SIDED Copy Operation Guide