Sharp MX-M182D manual Programming AN Administrator Password, System Settings, Change Admin PW

PROGRAMMING AN ADMINISTRATOR PASSWORD

1 Press the [SPECIAL FUNCTION] key.

DATA	SPECIAL	SPECIAL	FUNCTION
ON LINE		ID CARD	COPY
	FUNCTION
		SPECIAL	MODES
DATA	SCAN COLOUR MODE RESOLU	ORIG. SIZE		ENTER
LINE	COPY EXPOSURE PAPER SE
		PAPER SIZE		SET
The special function

screen will appear.

2 Select "SYSTEM SETTINGS" with the [] or [] key.

PQ	SPECIAL	FUNCTION
	PAPER	SIZE SET
LEX SCAN	DISPLAY CONTRAST
ED COPY	TOTAL	COUNT
ACC
LEX SCAN	SYSTEM	SETTINGS
3 Press the [OK] key.
GHI	Enter admin
BACK OK
PQRS	password.
PY	ADMIN PASSWORD:
The administrator		-----
AN

password entry screen appears.

4 Use the numeric keys to enter the five-digit administrator password.

	ABC	DEF	INTERRU
GHI	JKL	MNO	MODE SELECT
PQRS	TUV	WXYZ	CHANGE ADMIN PW
		@.-_	COPIER
ACC. #-C		READ-END	PRINTER
			SCANNER

•If this is the first time you are programming the administrator password, enter the factory default code. (Refer to the Start Guide)

•" " appears for each digit that you enter.

•The special modes screen will appear with "CHANGE ADMIN PW" selected.

5 Press the [OK] key.

OK	CHANGE	ADMIN PW
	PRESENT:22222
	NEW	:-----

The administrator password change screen appears.

6 Enter the new 5-digit administrator password with the numeric keys.

WXYZ

CHANGE ADMIN PW

PRESENT:22222

NEW :111--

Any 5 digits can be used for the administrator password.

7 Press the [OK] key.

OK	• The previously programmed
	administrator password is
	replaced by the new
	administrator password.

•Press the [CA] key to return to the base screen.

111