TROUBLESHOOTING

C. Misfeed in the transport area

1 Open the fusing paper guide by pressing down the green-labeled projection on the guide and remove the misfed paper.

Be careful not to tear the misfed paper during removal.

Warning

The fusing unit is hot. Do not touch the fusing unit when removing misfed paper. Doing so may cause a burn or injury.

2 If the misfed paper cannot be removed by the previous step but is visible in the paper output area, remove the paper by pulling it into the paper output area.

Be careful not to tear the misfed paper during removal.

6

3 Close the side cover.

The message " Clear paper path." will be cleared and copying will be possible.

• When closing the side cover, press on the Note handle.

If the paper was torn, make sure that no torn pieces remain in the machine.

If the message does not clear, check again to make sure that no pieces of paper remain.

96

Page 97
Image 97
Sharp MX-M182D Misfeed in the transport area, Close the side cover, Be careful not to tear the misfed paper during removal