Sharp MX-M232D, MX-M182 ID Card Copy, A5-A3 Size Factory default setting, Front Back Centre Line

ID CARD COPY

You can copy the front and back sides of ID card onto a page through this function, which can be used as margin shift function, too. The specified patterns of ID card copy are shown as follows.

A4 SIZE A5-A3 SIZE (Factory default setting)

Front

Back

Centre Line

Front Back

		3
•	Select the layout patterns as explained in "ID CARD SETTING" of SYSTEM SETTINGS (p.121) first, then follow
Note	the steps below to perform the copy.
•	ID card copy feature cannot be used in combination with interrupt copy, two-sided copy, dual page copy,
	XY-zoom, margin shift, edge + centre erase, 2 in 1/4 in 1, sort/group and rotation copy functions.
•	The following paper sizes can be used: A5, A5R, A4, A4R, B4, B5, B5R, A3 (5-1/2" x 8-1/2", 5-1/2" x 8-1/2"R,
	8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17"). (A5, A5R (5-1/2" x 8-1/2", 5-1/2" x 8-1/2"R) can only be used
	in bypass tray.)
•	When using A4 SIZE, the image may cut off even if using standard paper size.
•	In ID card copy mode, scan area and scan number (1 page) cannot be changed. Scan area is: X: 54 + 5 mm
	(1/4") (margin), Y: 86 + 10 mm (1/2") (top margin 5 mm (1/4") and bottom margin 5 mm (1/4")).
•	Auto paper selection and auto tray switch are invalid in ID card copy mode. Please select paper and tray
	manually.
•	Only making a single copy is available (Number of copies cannot be set.).

1 Place the ID card on the upper left corner of the document glass.

2 Press the [SPECIAL FUNCTION] key.

DATA	SPECIAL	SPECIAL	FUNCTION
ON LINE		ID CARD	COPY
	FUNCTION
		SPECIAL	MODES
DATA	SCAN COLOUR MODE RESOLUT	ORIG. SIZE		ENTER
LINE	COPY EXPOSURE PAPER SE
		PAPER SIZE		SET
The special function
screen will appear.

3 Select "ID CARD COPY" with the [ ] or [] key.

PQ	SPECIAL	FUNCTION
	ID CARD	COPY
LEX SCAN	SPECIAL	MODES
ED COPY	ORIG. SIZE		ENTER
ACC
LEX SCAN	PAPER SIZE		SET

4 Press the [OK] key.

OK

58