Sharp MX-M182D, MX-M202D, MX-M232D manual Disabling Enabling Auto Tray Switching, Paper

BEFORE USING THE MACHINE

7 Press the [OK] key.

OK	A message asking you to
	confirm the new paper size
	setting will appear.

8 Press the [OK] key.

OK	The selected paper size will be
	stored and the display will
	return to the base screen.

Affix the paper size label for the paper size Note selected in step 6 to the label position on the

right end of the tray.

DISABLING (ENABLING) AUTO TRAY SWITCHING

When auto tray switching is enabled and paper runs out during copying or printing, the job will continue using paper from a different tray if that tray has the same size of paper in the same orientation. (This function does not operate when using the bypass tray or when a fax is being printed.) This function has been enabled at the factory. If you prefer to disable the function, follow the steps below.

1 Press the [SPECIAL FUNCTION] key.

DATA	SPECIAL	SPECIAL	FUNCTION
ON LINE		ID CARD	COPY
	FUNCTION
		SPECIAL	MODES
DATA	SCAN COLOUR MODE RESOLUT	ORIG. SIZE		ENTER
LINE	COPY EXPOSURE PAPER SE
		PAPER SIZE		SET
The special function

screen will appear.

The above screen appears in copy mode.

4 Press the [] key repeatedly until "AUTO TRAY SWITCHING" appears.

PAPER SIZE SET

AUTO TRAY

SWITCHING

Move the cursor to the lowest tray and then press the [] key again. The above screen will appear.

2 Select "PAPER SIZE SET" with the [] or [] key.

PQ	SPECIAL		FUNCTION
	ID CARD		COPY
ED COPY	SPECIAL		MODES
LEX SCAN
LEX SCAN	ORIG. SIZE			ENTER
ACC
	PAPER	SIZE		SET
3 Press the [OK] key.
GHI	PAPER	SIZE		SET
BACK OK
	A4			A3

5 Press the [OK] key.

OK	PAPER		SIZE SET
		AUTO	TRAY
		SWITCHING

When a checkmark does not appear in the checkbox, the auto tray switching function will not operate.

6 Press the [] key.

PQRS	B4
A3
PY	A4
AN	A4R
The paper size setting

screen will appear.

You will return to the paper size setting screen.

PAPER		SIZE SET
	A4		A3
	A3		B4
			A4
			A4R

To re-enable auto tray switching, press the [OK] key in the screen of step 5 so that a checkmark appears.

27