Sharp MX-M202D, MX-M182D, MX-M232D manual Margin Shift OFF Down, Right

COPY FUNCTIONS

CREATING MARGINS WHEN COPYING(Margin shift)

The margin shift function shifts the image to create a margin at the edge of the paper. By default the function creates a 10 mm (1/2") margin at the left edge of the paper.

Margin (top) Margin (left edge)

A A

OriginalCopy

A A

OriginalCopy

•You can select whether to create a margin at the top edge or at the left edge of the paper.

•Five selections are available for the margin width: 0 mm, 5 mm, 10 mm, 15 mm, 20 mm (0", 1/4", 1/2", 3/4", 1"). (The default setting is 10 mm (1/2").)

•When making two-sided copies, a margin is created at the selected edge on the front side of the paper, and a margin is created on the back side of the paper.

•Margin shift cannot be used in combination with 2 in 1 / 4 in 1 copy (p.51).

•Margin shift cannot be used in combination with card shot (p.56).

•When margin shift is selected, rotating copying will not operate even if the condition for rotate copying is met.

•The default margin shift setting can be changed in the system settings. (p.121)

1 Place the original in the document feeder tray or on the document glass.

• When a left-edge margin is

selected and you are copying

from the document feeder

tray, place the original face up so that the margin edge is to the left.

When a left-edge margin is selected and you are copying from the document glass, set the original face down so that the margin edge is to the right.

•When a top-edge margin is selected, place the original with the margin edge toward the rear of the document feeder tray or the document glass.

2 Press the [SPECIAL FUNCTION] key and select "SPECIAL MODES" with the [] or [] key.

DATA	SPECIAL	SPECIAL	FUNCTION
ON LINE		ID CARD	COPY
	FUNCTION
		SPECIAL	MODES
DATA	SCAN COLOUR MODE RESOLUT	ORIG. SIZE		ENTER
LINE	COPY EXPOSURE PAPER SE
		PAPER SIZE		SET

The function screen appears with "SPECIAL MODES" selected.

4 Press the [OK] key.

OK	MARGIN		SHIFT
		OFF
		DOWN
		RIGHT	mm	(0~20)
The settings for margin		10
shift will appear.

5 Select the margin location with the [ ] or [ ] key and select the width with the [] or [] key.

PQ	• Select "DOWN" or "RIGHT"
	for the margin location.
	• If you select 0 mm (0"), the
ED COPY	printed result is the same as
LEX SCAN
	when "OFF" is selected.
LEX SCAN
ACC

6 Press the [OK] key.

OK	You will return to the base
	screen.

3 Press the [OK] key.

GHI	SPECIAL MODES
BACK OK
PQRS	MARGIN SHIFT
	ERASE
PY	DUAL PAGE COPY
AN	[OK]:ADJUST

The special modes screen will appear with "MARGIN SHIFT" selected.

7

MNO

WXYZ

@.-_

AD-END

Select other copy settings as needed and press the [START] key ().

To turn off the margin shift function, select the margin shift feature again and select "OFF".

53