Sharp MX-M232D, MX-M182 manual Manual Ratio Selection Preset Copy RATIOS/ZOOM, Copy Ratio, 86% 100%

COPY FUNCTIONS

MANUAL RATIO SELECTION (PRESET COPY RATIOS/ZOOM)

1 Place the original in the document feeder tray or on the document glass.

2 Press the [COPY RATIO] key.

•To cancel a ratio setting, return the ratio to 100% with the [ ] or [ ] key.

•The [COPY RATIO] key can be pressed to return the ratio to 100%.

4 Press the [OK] key.

GHI You will return to the base

BACK OK	screen.
	PQRS
PY
AN

E	PAPER SELECT COPY RATIO		AUTO IMAGE	O
E	RESOLUTION	ADDRESS	FORMAT	ORIG
	RESOLUTION	ADDRESS	BROADCAST	ORIG

Copy ratios that can be selected will appear.

COPY RATIO

115% 100%

86%	100%
ZOOM

5 Make sure that the desired paper tray
is selected.	3
If the auto paper select function has been
enabled, the appropriate copy paper size will
have been automatically selected based on the

original size and the selected copy ratio. If the auto paper select function has been cancelled or

3 Select a preset ratio with the [] or [] key, or set the ratio (zoom) with the [] or [] key.

PQ

ED COPY

LEX SCAN

LEX SCAN

	ACC
[	] key: Select a larger preset ratio
[	] key: Select a smaller preset ratio
[	] key: Decrease the ratio in increments of 1%
[	] key: Increase the ratio in increments of 1%

if you are copying onto a different size paper, use the [PAPER SELECT] key to select the paper tray with the desired paper size.

6 Set the number of copies and press the [START] key ().

WXYZ

•Preset reduction ratios are: 86%, 81%, 70%, 50% and 25% (95%, 77%, 64%, 50% and 25%). 25% can only be selected when the original is placed on the document glass.

•Preset enlargement ratios are: 115%, 122%, 141%, 200% and 400% (121%, 129%, 141%, 200% and 400%). 400% can only be selected when the original is placed on the document glass.

•Zoom ratios: Any ratio from 25% to 400% (50% to 200% when the original is placed in the document feeder tray) can be set in increments of 1%. You can use the [ ] or [ ] key to set the approximate ratio and then press the [] key to decrease the ratio or the [] key to increase the ratio.

•To decrease or increase the zoom ratio rapidly, hold

down the [ ] or [ ] key. However the value will stop at the preset reduction or enlargement ratios. To move beyond these ratios, release the key and then hold it down again. (Note that if the key auto repeat function has been disabled in the system settings, the ratio will not change when the key is held down. (See "DISABLE AUTO KEY REPEAT" on p.119.))

38