Sharp MX-M182D, MX-M202D, MX-M232D manual Misfeed in the fusing area, Injury

TROUBLESHOOTING

B. Misfeed in the fusing area

1 Push gently on both ends of the front cover and open it.

4 Lift the fusing unit release levers, to return them to their operating positions.

2 Turn the roller rotating knob in the direction of the arrow.

Roller rotating knob

3 Carefully remove the misfed paper. Lower the fusing unit release levers to allow easier removal.

Fusing unit	Be careful not to tear the
release lever	misfed paper during
	removal.

Warning	The fusing unit is hot. Do not touch
	the fusing unit when removing misfed
	paper. Doing so may cause a burn or
	injury.
	• Do not touch the photoconductive drum
Caution (green portion) when removing the misfed
	paper. Doing so may damage the drum and
	cause smudges on copies.

•Be careful about unfixed toner on the misfed paper not to soil your hands or clothes.

5 Close the front cover and side cover.

The message " Clear paper path." will be cleared and copying will be possible.

Note	•	When closing the front cover, gently hold
		both ends.

•When closing the side cover, press on the handle.

•If the message does not clear, check again to make sure that no pieces of paper remain.

95