Scanner Function | Sharp MX-M202D, MX-M182D, MX-M232D instruction

APPENDIX

SCANNER FUNCTION

Specifications

	Type	Flatbed scanner
	Scanning method	Document glass/SPF/RSPF
	Light source	Cold cathode fluorescent lamp
	Resolution	Factory default: 150 dpi
	Resolution	Setting range: 50 dpi - 9600 dpi
		Setting range: 50 dpi - 9600 dpi
	Original types	Sheets, bound documents
	Effective scanning area	Approx. 297 mm (11-11/16") (Lengthwise) x 431 mm (16-31/32") (Width)
	Scanning speed	1.44 msec/line (Colour), 0.48msec/line (Greyscale/Black and White)
	Input Data	1 bit or 12 bit
	Output Data	1 bit or 8 bit
	Scanning colours	Black and white 2 value, Greyscale, Colour
	Protocol	TWAIN, WIA (Windows XP/Vista/7), STI
	Interface	USB 2.0 (Full-Speed/Hi-Speed compatible interface)
	Drop out colour	Yes
	Supported operating	Windows 2000/XP/Vista/7
	Supported operating	(Detailed information can be found in "HARDWARE AND SOFTWARE
	systems
	systems	REQUIREMENTS" (p.6))
		REQUIREMENTS" (p.6))
	Void area	Max. 2.5 mm (1/10") (leading and trailing edges)
	Void area	Max. 3.0 mm (3/25") (along other edges in total)
		Max. 3.0 mm (3/25") (along other edges in total)
	Interface cables	[USB cable]
	Interface cables	Shielded twisted pair cable (max. length 3 m (10 feet), must support USB 2.0)
		Please purchase a commercially available USB cable.
	Scanner utilities	Button Manager

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification Note changes for product improvement without prior notice. The performance specification figures indicated are

nominal values of production units. There may be some deviations from these values in individual units.

105

Image 106

Sharp MX-M202D, MX-M182D, MX-M232D manual Scanner Function

Contents

Model MX-M182 MX-M182D MX-M202D MX-M232D Contents 103 100101 104 112 110111 113 About the Manuals Using the ManualIntroduction Meaning of R in Original and Paper Size Indications SPF Differences Between ModelsConventions Used in this Manual Rspf Software Before Software SetupHardware and Software Requirements Turn the power switch to the on position Installing the SoftwarePower on the Machine Double-click the Setup icon When installing is finished, click the Close button Click the MFP Driver button This completes the installation of the software System requirements for USB 2.0 Hi-Speed mode Connecting to a ComputerConnecting a USB Cable Interface cable Click the Next button Using the Machine AS a Shared PrinterYou will return to the window of . Click the Close button Configuring the Printer Driver Click the Sharp MX-XXXX icon and select Properties Setting UP Button ManagerWindows XP/Vista/7 Click the OK button Windows Select Sharp Button Manager AA in Send to this application Driver cannot be installed Windows 2000/XP TroubleshootingPlug and Play window does not appear Click the Start button, and then click Control Panel Click Uninstall a programRemoving the software Select the driver from the list, and remove the software Part Names and Functions Feeding roller cover when the SPF/RSPF is installed Document cover when installedOriginal guides when the SPF/RSPF is installed Right side cover when the SPF/RSPF is installed Operation Panel Copy Ratio key Start key / indicatorPaper Select key Auto Image key Display base screen Example Copy modeOperation in COPY, PRINT, SCAN, and FAX Modes 100% Power OFF Power on and OFFPower on Power save modes Paper Paper tray type Paper type Size Weight CapacityLoading Paper Special papers Push the pressure plate down Loading PaperLoading the paper tray Gently push the paper tray into the machine Loading the bypass tray Important points when inserting paper in the bypass trayUnfold the bypass tray Copy Changing the Paper Size Setting of a TrayEnvelopes Paper Size SET Paper Disabling Enabling Auto Tray SwitchingAuto Tray Switching Auto Using Auditing Mode Auditing ModeNumber of Accounts in Auditing Mode Copies MADE000,000 REMAINING050,000 Close the SPF/RSPF Normal CopyingCopying from the document glass Make sure that the desired paper tray is selected Copying Copying from the SPF/RSPFPress the Start key to begin Copy is delivered to Copying books or originals with folds or creases Stream feeding modeRemoving the document cover Originals that can be used in the SPF/RSPF Points concerning the position of the printed copy image Text/photo Making a Copy Darker or LighterAuto Text Important note when making a large number of copies Setting the Number of CopiesAuto tray switching when there are two or more paper trays Selecting the Tray ORIG. Size Enter Inch Selecting the Original SizeORIG. Size Enter Selecting an inch original size Extra ExtraOKORIG. Size Enter Size Input Press the Paper Select key to select the desired tray Reducing or Enlarging a CopyAutomatic Ratio Selection Press the Auto Image key Copy Ratio Manual Ratio Selection Preset Copy RATIOS/ZOOM86% 100% Modes Margin Shift OFF AdjustXY Zoom Set the vertical ratio with the , , , or keys Document Automatic TWO-SIDED Copying MX-M182D/MX-M202D/MX-M232DOriginal → Paper Usable paper Glass Press the 2-SIDED Copy key TWO-SIDED Copying of ONE-SIDED OriginalsBinding Change OFF Select 1 to 2 with the or key, or with the 2-SIDED Copy key Copy Mode Binding Change on Select 2 to 2 with the or key, or with the 2-SIDED Copy key Copy Mode Select 2 to 1 with the or key, or with the 2-SIDED Copy key TWO-SIDED Copying Using the Bypass Tray Place original B as shown below Okoff Dual page CopyingErase Dual Copy Checkmark appears Interrupting a Copy RUN Replace the previous originals and press the Start key This section explains major convenient copy functions Convenient Copy FunctionsSort COPY/GROUP Copy Sort copy Group copy Sort Offset function enabled Offset function disabledSort Offset function 1 Copy 2in1 OkchangeOK2in1/4in1 Pattern Margin Shift OFF Down Right Edge Erasing Shadows around the Edges of a CopyErase Centre Select the erasure width with the or key SIZEmm Card ShotCard Shot Front side of the card is scanned ID Card Copy A5-A3 Size Factory default settingFront Back Centre Line Press the Start key Online Basic PrintingOffline If the Tray Runs OUT of Paper During Printing Pausing a Print JOBWhen the job separator tray is Note installed Make sure that Sharp MX-xxxx is selected as the printer Opening the Printer Driver from the Start Button Click the Printing Preferences button in the General tab Printer Driver Setting Screen Printing Multiple Pages on ONE Check the Fit To Paper Size button Rotating the Print Image 180 DegreesRotate 180 degrees A3 or Ledger Text To Black/Vector To Black Click the Advanced tab in the printer driver setup screenPrinting Faint Text and Lines in Black Select the zoom ratio To adjust a setting, drag Slide bar or Click the or button Adjusting the Brightness and Contrast of the ImageHow to Print a Watermark Printing a Watermark Sided Book Sided Tablet Vertical Horizontal TWO-SIDED PrintingPrinting result Bound at the side Bound at the top User Settings Saving Frequently Used Print SettingsSaving Settings AT the Time of Printing Using saved settings Outline of the Print Status Window Scanning Overview SC3 Scanning Using the Keys on the MachineSC2 SC4 Click to save your settings and exit the dialog box Scan Setup area Set the scan conditionsButton Manager Setting screen Button Manager will open Button Manager SettingsButton Manager scan menu factory default This completes the settings Scanning from a TWAIN-COMPLIANT Application Only when using the RspfScanning from Your Computer Select Sharp MFP Twain AA, and click the Select button When you are ready to begin scanning, click the Scan button Specify the scanning area and set the scan preferences Scanner driver settings Set-up screen Rotate button Preview screenPreview screen Image Size button Click the Scan button Scan screen WIA driver will appear Scanning from the Scanner and Camera Wizard Windows XP Scanner and Camera Wizard will appear Click the Finish button Printing and Scanning Problems MACHINE/COPYING ProblemsThis chapter describes troubleshooting and misfeed removal MACHINE/COPYING Problems Paper is not loaded properly Problem Cause and solution Misfeed occursPaper is outside of the specified size and weight Range Pieces of paper inside machine Original has many solid black areas Original size is not Display or the Data indicator is blinkingOriginal is curled or folded Automatically selected or the copy Start indicator blinks Problem Cause and solution Any other indicators turned offDisplay turns off Printing and Scanning Problems 117 Been printed completely Orientation of document setting is not correctPrinted, but the print data has not Uneven Lighter than expected You have not specified a suitable resolutionBrightness and contrast settings are not suitable Poor scanning quality There is not enough machine memory Message Action MB of expansion memory Remove the misfed original Misfeed RemovalMisfeed in the SPF/RSPF Section B Misfeed in the Bypass Tray Section C Misfeed in the paper feed area Misfeed in the MachineClose the front cover and side cover Misfeed in the fusing area Injury Close the side cover Misfeed in the transport areaBe careful not to tear the misfed paper during removal Close the upper paper tray Misfeed in the Upper Paper TrayPush the upper paper tray in completely Remove the misfed paper Misfeed in the Lower Paper TrayOpen the lower side cover Close the lower side cover Required indicator Replacing the Toner Cartridge Routine Maintenance Checking the Total Output Count Routine Maintenance Cleaning the Document Glass and SPF/RSPF/DOCUMENT Cover Cleaning the Bypass Tray Paper Feed Roller Cleaning the Transfer Charger ORIG. Size Adjusting the Display ContrastContrast of the display can be adjusted as explained below Display Contrast Specifications Specifications Printer and ScannerPrinter Function Scanner Function Optional Equipment Single Pass FEEDER/REVERSING Single Pass Feeder DimensionsDocument Cover Part names Power supplySheet Paper Feed UNIT/2 X 250-SHEET Paper Feed Unit AR-D36 AR-D37 Store the supplies in a location that is Storage of SuppliesProper Storage Store paper in the wrapper and lying flat Programs for Copy Mode Programming AN Administrator Password System Settings Programming AN Administrator PasswordChange Admin PW Programs for general use of the machine System Settings ListPrograms for Copy Mode Program name Using the System Settings Copier Reset 1 ACC Auditing ModeReset Account Account Control ACC. # Control ACC. # ControlDelete Change Single ACC. Limit Cancel Jobs of Invalid AccountsAccount Limit ACC. # Security Device Control Waiting Copy Lamp SettingUSB2.0 Mode Offset Function Operation Setting KEY Touch Sound Disable Auto KEY RepeatDisable Paper Size SET Keys Touch Sound AT Initial Point Energy Save Margin Default Copy SettingsExposure Adjust Erase Adjust Default Exposure Card Shot DefaultDefault Tray SET Stream Feeding Disable 2-SIDED Copy Photo Mode DefaultDisable Auto Paper Selection Sort Auto Select Operation Guide