Sharp MX-M182D, MX-M202D, MX-M232D manual Card Shot, SIZEmm

CARD SHOT

When copying a card, this function allows you to print the front and back sides of the card next to each other on a single sheet of paper.

This function creates 2 in 1 images of the front and back side of the card and centres them on the paper.

Original Copy

CARD

Front of card

Back of card

CARD

Example: Portrait A4 size

CARD

Example:

Landscape

A4 size

•Paper cannot be fed from the bypass tray.

•The card shot function cannot be used in combination with margin shift, edge erase, dual page copy, 2 in 1 / 4 in 1 copy, and XY zoom copy.

•When card shot is used, the rotation copy function does not operate.

1 Place the original on the document glass.

2 Press the [SPECIAL FUNCTION] key and select "SPECIAL MODES" with the [] or [] key.

DATA	SPECIAL	SPECIAL	FUNCTION
ON LINE		ID CARD	COPY
	FUNCTION
		SPECIAL	MODES
DATA	SCAN COLOUR MODE RESOLUT	ORIG. SIZE		ENTER
LINE	COPY EXPOSURE PAPER SE
		PAPER SIZE		SET
The special function
screen will appear.
3 Press the [OK] key.
BACK	GHI	SPECIAL	MODES
	OK
	PQRS	MARGIN		SHIFT
		ERASE
PY		DUAL	PAGE COPY
The special modes		[OK]:ADJUST
AN

screen will appear.

4 Select "CARD SHOT" with the [] or [] key.

PQ	SPECIAL MODES
	2in1/4in1
LEX SCAN	XY ZOOM
ED COPY	CARD SHOT
ACC
LEX SCAN	[OK]:CHANGE

5
	Press the [OK] key.			3
	OK	CARD	SHOT
		SIZE(mm)
		X:	86
		Y:	54

The card shot screen appears.

The default values for the length and width Note that initially appear when this screen is

displayed can be set "CARD SHOT DEFAULT" (p.122) in the system settings.

6 Select "X" (width) with the [ ] or [ ] key and enter the width with the [] or [] key, and then do the same for the length (Y).

CARD SHOT

SIZE(mm)

X: 100

Y: 100

Any number from 25 mm to 210 mm (1" to Note 8-1/2") can be entered for the width, and any

number from 25 mm to 210 mm (1" to 8-1/2") can be entered for the length.

7 Press the [OK] key.

OK	You will return to the base
	screen.

56