Sharp MX-M232D, MX-M182D, MX-M202D MACHINE/COPYING Problems, Printing and Scanning Problems

6

Chapter 6

TROUBLESHOOTING

This chapter describes troubleshooting and misfeed removal.

TROUBLESHOOTING

If you experience difficulty using the machine, check the following troubleshooting guide before calling for service. Many problems can be easily resolved by the user. If you are unable to solve the problem using the troubleshooting guide, turn off the power switch and unplug the machine, and contact your authorised service representative.

MACHINE/COPYING PROBLEMS
The machine does not operate	83
Copies are too dark or too light	83
Blank copies	83
Part of the image is cut off or there is too much blank space	83
Wrinkles appear in the paper or the image disappears in places	83
Paper misfeed	84
The original size is not automatically selected or the copy is not made on paper that matches the size of the
original	85
Copies are smudged or dirty	85
White or black lines appear on copies	85
Paper size for a paper tray cannot be set	85
A copy job stops before it is finished	85
The display turns off	86
Lighting fixture flickers	86
PRINTING AND SCANNING PROBLEMS
The machine does not print. (ONLINE indicator does not blink.)	87
The machine does not print. (DATA indicator does not blink.)	87
The machine does not print. (ONLINE indicator was blinking.)	87
A Notice Page (NP-001) has been printed, but the print data has not been printed completely	88
Printing is slow	88
The printed image is light and uneven	88
The printed image is dirty	88
The printed image is skewed or it runs off the paper	88
The printed image is darker or lighter than expected	89
Poor scanning quality	89
Unable to scan the image	90
Scanner transfer speed is slow	90
INDICATORS AND DISPLAY MESSAGES	91
MISFEED REMOVAL	92
REPLACING THE TONER CARTRIDGE	99

82