BEFORE USING THE MACHINE

Envelopes

Do not use the following envelopes, as misfeeds will occur.

Envelopes with metal tabs, clasps, strings, holes, or windows.

Envelopes with rough fibres, carbon paper, or glossy surfaces.

Envelopes with two or more flaps.

Envelopes with tape, film, or paper attached to the flap.

Envelopes with a fold in the flap.

Envelopes with glue on the flap to be moistened for sealing.

Envelopes with labels or stamps.

Envelopes that are slightly inflated with air.

Envelopes with glue protruding from the seal area.

Envelopes with part of the seal area peeled off.

CHANGING THE PAPER SIZE SETTING OF A TRAY

If the size of the loaded paper is different from the size shown in the display, follow the steps below to change the paper size setting of the tray.

The paper size setting cannot be changed during copying, printing, fax printing (when the fax option is installed), or interrupt copying, or when a 2 misfeed has occurred. However, if the machine is out of paper or out of toner, the paper size setting can be changed during copying, printing, and

fax printing.

See "PAPER" (p.23) for information on the specifications for the types and sizes of paper that can be loaded in the paper trays. The paper size cannot be set for the bypass tray.

1 Press the [SPECIAL FUNCTION] key.

DATA

SPECIAL

SPECIAL

FUNCTION

ON LINE

 

ID CARD

COPY

 

FUNCTION

 

SPECIAL

MODES

 

 

DATA

SCAN COLOUR MODE RESOLU

ORIG. SIZE

ENTER

LINE

COPY EXPOSURE PAPER SE

 

 

 

 

PAPER SIZE

SET

The special function

screen will appear.

The screen shown above is the copy mode screen.

2 Press the [] or [] key to select "PAPER SIZE SET".

4 Press the [ ] or [ ] key to select the paper tray for which the paper size is being changed.

Example: Tray 2

PAPER

SIZE SET

A4

A3

A3

B4

 

A4

 

A4R

5 Press the [] key.

PQ

SPECIAL

FUNCTION

 

ID CARD

COPY

ED COPY

SPECIAL

MODES

LEX SCAN

LEX SCAN

ORIG. SIZE

ENTER

ACC

 

PAPER SIZE

SET

3 Press the [OK] key.

 

 

The cursor moves to the paper size selection position on the right.

PAPER SIZE SET

 

 

A4

 

A3

 

 

 

A3

 

B4

 

 

 

 

 

A4

 

 

 

 

 

A4R

 

GHI

PAPER

SIZE SET

BACK OK

PQRS

A4

A3

 

A3

B4

PY

 

A4

AN

 

A4R

The paper size setting

 

screen will appear.

: Shows tray "1".

Note : Shows tray "2".

For the paper trays and tray numbers, see "PAPER" (p.23).

6 Press the [ ] or [ ] key to select the paper size.

Example: Selecting B4 size

PAPER SIZE SET

A4 A3

A3 B4

A4

A4R

To change the size of another paper tray, press the [ ] key and then repeat steps 4 to 6.

26

Page 27
Image 27
Sharp MX-M232D, MX-M182D, MX-M202D manual Changing the Paper Size Setting of a Tray, Envelopes, Copy, Paper Size SET