TROUBLESHOOTING

MISFEED IN THE LOWER PAPER TRAY

Note

Make sure that there is no misfed paper in the tray before pulling it out. (p.94)

Use the following procedure to remove misfeeds that occur in the 250-sheet paper feed unit/2 x 250-sheet paper

 

 

feed unit.

 

 

 

1 Open the lower side cover.

Grasp the handle to open the lower side cover.

2 Remove the misfed paper.

Be careful not to tear the misfed paper during removal.

3 If the misfed paper is not seen in step 2, lift and pull out the lower paper tray and remove the misfed paper.

Be careful not to tear the misfed paper during removal.

4 Close the lower side cover.

The message " Clear paper path." will be cleared and copying will be possible.

5 Close the lower paper tray.

6

Note If the message does not clear, check again to make sure that no pieces of paper remain.

98

Page 99
Image 99
Sharp MX-M232D, MX-M182D, MX-M202D Misfeed in the Lower Paper Tray, Open the lower side cover, Remove the misfed paper