Sharp MX-M232D, MX-M182 Document cover when installed, Side cover handle, Bypass tray guides

BEFORE USING THE MACHINE

21 22 23

24

19
26	25
20

27

2

28 29

13Document cover (when installed)

Open to make a copy from the document glass.

14Side cover

Open to remove misfed paper.

15Side cover handle

Pull to open the side cover.

16Bypass tray guides

Adjust to the width of the paper when using the bypass tray.

17Bypass tray

Special paper (heavy paper or transparency film) can be fed from the bypass tray.

18Bypass tray extension

Pull out when feeding large paper such as A3 and B4 (11" x 17" and 8-1/2" x 14").

19Toner cartridge lock release lever

To replace the toner cartridge, pull out the toner cartridge while pushing on this lever.

20Toner cartridge Contains toner.

21Document feeder tray (when the SPF/RSPF is installed)

Place the original(s) that you wish to scan face up here. Up to 40 sheets can be placed.

22Original guides (when the SPF/RSPF is installed)

Adjust to the size of the originals.

23Feeding roller cover (when the SPF/RSPF is installed)

Open to remove misfed originals.

24Right side cover (when the SPF/RSPF is installed)

Open to remove misfed originals.

25Fusing unit release levers

To remove the paper misfed in the fusing unit, push down on these levers and remove the paper.

Warning	The fusing unit is hot. Do not touch
	the fusing unit when removing
	misfed paper. Doing so may cause a
	burn or injury.

26Roller rotating knob

Rotate to remove misfed paper.

27Exit area (when the SPF/RSPF is installed)

Originals exit the machine here after copying/scanning when the SPF/RSPF is used.

28Photoconductive drum

Images are formed on the photoconductive drum.

Caution	Do not touch the photoconductive drum
	(green portion) when removing the misfed
	paper. Doing so may damage the drum and
	cause smudges on copies.

29Fusing unit paper guide Open to remove misfed paper.

The model name is on the front cover of the Note machine.

18