Sharp MX-M182D, MX-M202D, MX-M232D Copying from the document glass, Copy Mode Binding Change on

COPY FUNCTIONS

Copying from the document glass

1 Place the original for the front side of the copy on the document glass, and close the SPF/RSPF.

6 Make sure that the desired paper tray is selected.

7 Set the number of copies and press the [START] key ().

WXYZ

2 Press the [2-SIDED COPY] key.

OUTPUT 2-SIDED COPY	COPY	MODE
ORIGINAL SIZE DUPLEX SCAN
ORIGINAL SIZE DUPLEX SCAN	1	to	1
	1	to	2
	2	to	2

The duplex mode selection screen appears.

3 Select "1 to 2" with the [] or [] key, or with the [2-SIDED COPY] key.

PQ	COPY	MODE
	1	to	1
ED COPY	1	to	2
LEX SCAN
ACC	2	to	2
LEX SCAN

BINDING CHANGE OFF

4 If you wish to have the orientation of the image on the back of the copy paper be opposite the orientation of the image on the front, set "BINDING CHANGE" to "ON" with the [] or [] key.

COPY MODE

1 to 1

1 to 2

2 to 2

BINDING CHANGE ON

5 Press the [OK] key.

GHI You will return to the base

BACK OK

screen.

PQRS

PY

AN

8 Remove the first original and then place the original for the back side of the copy on the document glass. Close the SPF/RSPF and press the [START] key ().

MNO

WXYZ

@.-_

AD-END

•The copy will be delivered to the centre tray.

•To cancel two-sided copying, press the [C] key.

•To cancel two-sided (duplex) copy mode, press the [2-SIDED COPY] key to select "1 to 1" and then press the [OK] key.

•When making two-sided copies of an odd number of originals, touch the [READ-END] key ( ) after scanning the last original.

43