Sharp MX-M202D Reducing or Enlarging a Copy, Automatic Ratio Selection, Press the Auto Image key

REDUCING OR ENLARGING A COPY

There are three ways to enlarge and reduce copies:

•Automatic selection of a ratio according to the paper size: Auto ratio selection

•Specifying a ratio from 25% to 400%: Preset ratios/zoom

•Selecting the vertical and horizontal ratios separately: XY zoom

Note When the SPF/RSPF is being used, the zoom copy ratio range is 50% to 200%.

AUTOMATIC RATIO SELECTION

1 Place the original in the document feeder tray or on the document glass.

The original size will appear in the display. If the correct size does not appear, see "SELECTING THE ORIGINAL SIZE" (p.35).

Automatic ratio selection can be used when Note the original size is , A3, B4, A4, A4R, A5,

11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R and 5-1/2" x 8-1/2". It cannot be used for other sizes.

2 Press the [PAPER SELECT] key to select the desired tray.

EXPOSURE PAPER SELECT COPY RATIO AUT		If the bypass tray is selected,
COLOUR MODE RESOLUTION ADDRESS	FO	automatic ratio selection cannot
PROGRAM RESOLUTION ADDRESS	BRO	be used.

3 Press the [AUTO IMAGE] key.

CT COPY RATIO		AUTO IMAGE	OUTPUT	2-S
N	ADDRESS	FORMAT	ORIGINAL SIZE	DU
N	ADDRESS	BROADCAST	ORIGINAL SIZE	DU

•The copy ratio will be automatically set.

•If the original and paper are in different orientations, the image is automatically rotated to match the paper orientation (rotation copy). However, if enlargement is selected for copying onto a paper size larger than A4 (8-1/2" x 11"), the image will not be rotated.

•Rotation of the image can be disabled in the system settings when reducing or enlarging a original. (p.122)

•If the message "Image edge loss." is displayed, part of the original image may be cut off.

4 Set the number of copies and press the [START] key ().

WXYZ

•To cancel automatic ratio selection, press the [AUTO IMAGE] key again.

•When copying from the SPF/RSPF, automatic ratio selection mode will automatically disable after the [START] key is pressed and the original is scanned.

37