3.Once the software has been fully installed, connect your BlackBerry® device to your PC using the supplied USB cable. (Your PC will detect the connection and a “Found New Hardware” icon may appear in your system tray.)
Note: Before using Sprint PCS Connection Manager with your BlackBerry® device, you must first install and connect with the BlackBerry® Desktop Software (version 4.1 or higher). See “Installing the BlackBerry® Desktop Software” on page 32 for details.
4.Launch the Sprint PCS Connection Manager Software and click Go to connect. (Before connecting, make sure any other Internet connections on your PC have been disabled.)
5.Once the connection is established, launch an Internet session, check your email, or do anything else you would do using a traditional data connection.
6.When you’re ready to terminate the data connection,
7.Disconnect the USB cable from your BlackBerry® device and from your PC.
Note: While your data connection is active, incoming calls ring through and can be answered, interrupting the data session. During a call, the data session is suspended (you can’t access additional pages), but when the call is finished, you are returned to your active data session.
Using Your Device
Using Your BlackBerry® 8830 | 31 |