Uniden DCT 748 owner manual 5VQTGFKV0Q, 㨫, KUVKPEVKXG4KPI  0Q5GNGEVP  Nkemgt

note

•Selecting a phonebook location where a number is already stored overwrites the old number. The new

5) Press select/ /audio tone to store the name;
Store/Edit No. appears.	5VQTG'FKV0Q

㨫

6)Use the number keypad, */tone/ , or #/ to enter the phone number (up to 20 digits). To insert a 2- second pause in the dialing sequence, press pause/redial.

If you make an error, use menu/clear to erase the incorrect digits. When you are finished, press select/ /audio tone to store the number.

number will be stored in the phonebook location.

•When the memory is full, you will hear a beep and Memory Full appears. You cannot store names and

7)If you store the phonebook location from the

handset, Distinctive Ring appears. Press /vol/∧ or /vol/∨ to move the pointer to one of the Distinctive Ring options and then press

select/ /audio tone.

&KUVKPEVKXG4KPI

0Q5GNGEVP

(NKEMGT

numbers.

If you choose not to store a Distinctive Ring, simply select the "No Selectn" option.

•The pause key counts as one digit. Pressing pause/redial more than once increases the length of the pause between numbers. Each pause represents a 2

8) Speed Dial appears. Press /vol/∧ or /vol/∨ to move the pointer to select the Speed dial location (10 locations: SPD1-SPD0).

5RGGF&KCN 0Q5GNGEVP 52&'ORV[

second delay.

If you choose not to store the name/number as a Speed Dial, simply choose the "No Selectn" option.

[ 3 7 ] P H O N E B O O K w w w . u n i d e n . c o m