Using Your Answering System
The new message LED on the handset and base blink when you have new messages in your answering system. The LED stops flashing when all new messages are played back.
The answering system is designed to play your new messages first. After you play all your new messages, you can then play your old messages.
Playing your messages
1) When the base is in standby mode, press 
. The system announces the number of new and old messages. The time and day that each message was received is announced after the message is played. The message number is announced in the begining of each message.
2)When all new messages have been played, you hear a confirmation tone, and the system announces "End of messages." The system returns to standby. After you have reviewed your new messages, you can play your old messages by pressing
again. Once you have listened to a new message, it then becomes an old message. The old messages will be played in the order in which they were received.
note 
•When the answering system is full, you will hear "The memory is full. Please erase your messages." and the message LED will blink quickly. You should delete some messages so that the system can record new messages.
•The time stamp will not be heard until you have set the time.
THE INTEGRATED TELEPHONE ANSWERING DEVICE
w w w . u n i d e n . c o m | T H E I N T E G R A T E D T E L E P H O N E A N S W E R I N G D E V I C E [ 5 4 ] |