note 
Call Transfer Feature
The call transfer feature allows you to transfer a call between two handsets.
•If all handsets are paged, only the first party to answer the page will connect.
•If you do not select a handset within ten
1)During a call, press hold/transfer/int’com.
2)Use 
/vol/∧ or 
/vol/∨ to select the handset you want to transfer the call to, then press
select/
/audio tone.
The call will automatically be placed on hold, and a paging tone sounds.
*QNFVQVTCPUHGT
*CPFUGV
*CPFUGV
seconds, the operation will be canceled.
To cancel the transfer, press talk/flash or 
on the initiating handset.
Answering a Call Transfer Page
When the page tone sounds, the display will show the ID of the handset that is transferring the call.
1)Pick up the handset from the cradle. (If AutoTalk is enabled, the handset will automatically answers when you pick it up.)
2)Press talk/flash or intcom/hold. (If Any Key Answer is enabled, press a number key, */tone/
, or #/
to answer the page.)
Accepting the call transfer
After answering the page, if you want to accept the call and speak to the outside caller, press talk/flash.
[ 6 5 ] M U L T I - H A N D S E T F E A T U R E S | w w w . u n i d e n . c o m |