Voice Memo
The voice memo function allows you to record messages (more than two seconds and less than four minutes). The voice memo messages are recorded as an incoming messages.
1)With the phone in standby mode, press select/ 
/audio tone.
2)During the annoucement "To record memo message, press seven. To record your greeting, press eight. For help, press zero.", press 7.
3)Start recording after the announcement "Record memo message" and the confirmation tone.
When recording is finished, press 5 or 7.
Remote access away from home
You can operate your answering system from a remote location using any touch- tone telephone.
1)Call your telephone number and wait for the system to answer. If the answering system is off, it will answer after about ten rings and sound a series of beeps.
2)During the greeting message (or a series of beeps when the answering system is off), press 0 and enter your security code within two seconds (see "Setting a Security Code" on page 49).
3)The answering system announces the current time and the number of messages stored in memory. You hear "To play incoming messages, press
4)Enter a command within 15 seconds, each command there after must be entered within two seconds. You may select a command from the following chart:
note 
•When the answering system is full, you will hear the announcement, "The memory is full, Please erase your messages.", and recording is terminated.
•The time stamp will not be heard until you have set the time. See "Setting Day and Time" on page 22.
•The system will only playback messages for four minutes and then it returns to the command waiting mode. To continue playing your messages, press 0 then 2 again within 15 seconds.
•If you enter an incorrect security code three times, you will hear a beep and the system will return to standby.
THE INTEGRATED TELEPHONE ANSWERING DEVICE
w w w . u n i d e n . c o m | T H E I N T E G R A T E D T E L E P H O N E A N S W E R I N G D E V I C E [ 6 0 ] |